Rheologica Acta
Издатель: Springer Nature · 18 статей
-
Combustion Synthesis of W–Ni Alloy from Nickel Tungstate
Abstract Tungsten–nickel (W–Ni) alloys are promising materials for advanced structural and functional applications due to their unique combination of mechanical, thermal, and magnetic properties. However, their synthesis remains...
-
Spatial Unsteady Wave Regimes of Gasless Layer Combustion
Abstract Numerical simulation of unsteady spatial combustion in a thin layer of gasless composition was performed. In the unsteady regime, the influence of layer width on cellular combustion dynamics was analyzed, focusing on the number...
-
Combustion-Driven Formation of Fe–Ni Magnetic Materials
Abstract Achieving bulk nanocrystalline Fe–Ni-based alloys with controlled microstructure and magnetic performance still remains a major challenge. Here, we demonstrate a rapid, energy-efficient route to fabricate Fe 4 Al 4 Ni 8 B γ...
-
Self-Propagating High-Temperature Synthesis of Aluminum Oxynitride for Transparent Ceramics
Abstract Aluminum oxynitride (AlON) powders were prepared by self-propagating high-temperature synthesis (SHS) at nitrogen pressures from 0.5 to 8 MPa using magnesium perchlorate as an oxidizer to enhance combustion of Al–Al 2 O 3...
-
Co- and Mn-Doped ZnO Pigments Synthesized via Ginkgo Biloba Leaf-Assisted Self-Propagating Combustion: Structural and Optical Properties
ZnO-based pigments doped with Co and Mn ions were synthesized via a self-propagating combustion method using Gingko biloba leaves as a bio-derived fuel. Thermogravimetric analysis confirmed an effective combustion interaction between...
-
Temperature-Dependent Phase Stability in NbTaCrTi(Mo,Hf) Refractory High-Entropy Alloys
Abstract The high-temperature behavior of two refractory high-entropy alloys, Mo 24 Nb 25 Ta 12 Cr 23 Ti 16 and Nb 45 Ta 20 Hf 15 Ti 15 Cr 5 , was examined. Both materials exhibited strong thermal stability, preserving their bcc-based...
-
Solution Combustion Synthesis as a Route for the Preparation of Hydroxyapatite and Tricalcium Phosphates: A Review
Abstract Calcium phosphates (CPs) are biomaterials of significant interest in bone tissue engineering due to their close chemical and structural similarity to the inorganic component of natural bone. Among this family, hydroxyapatite...
-
Study of Reaction Front Propagation in Magnesiothermic Reduction of UF 4
Abstract Magnesiothermic reduction of uranium tetrafluoride (UF 4 ) is a self-propagating high-temperature process widely employed for uranium metal production. In this study, the influence of charge preheating temperature and ignition...
-
Starch-Assisted Gel-Combustion Synthesis of Nano α-Fe 2 O 3 and Its Catalytic Effect on Ammonium Nitrate Decomposition
Abstract Nano-sized α-Fe 2 O 3 powders were synthesized via a starch-assisted gel-combustion method. The effects of fuel type, equivalence ratio (Φ), and ammonium nitrate addition on phase formation and crystallite size were...
-
Combustion-Synthesized Ferrimagnetic Spinel MnFe 2 O 4 with Enhanced Magnetic Response
Abstract Manganese ferrite (MnFe 2 O 4 ) is a technologically important soft ferrimagnetic spinel oxide with high saturation magnetization for magnetic and electronic devices. In this work, manganese ferrite (MnFe 2 O 4 ) nanoparticles...
-
Microstructural Evolution in TiC-Reinforced Entropy-Stabilized Alloys
Abstract TiC-reinforced entropy-stabilized composites were synthesized via self-propagating high-temperature synthesis (SHS) in the Ti–Mn–Co–Ni–Al–C system and consolidated using spark plasma sintering (SPS) technique. Thermodynamic...
-
SHS-Derived (CrTi)B 2 –NiMnAl Cast Composites for Protective Coating Fabrication
Abstract Cast Ti–Cr boride composites with a Ni–Al–Mn binder were prepared via high-temperature synthesis to develop high-performance surfacing electrodes. It was revealed that the burning velocity and phase composition/microstructure...
-
Combustion Front Propagation in a Layered Ti–C– x Cu System
Abstract Combustion wave dynamics were analyzed in a two-layer Ti–C–Cu system under SHS conditions. Utilizing equimolar Ti–C mixture with varying Cu amounts, the study showed that combustion temperatures surpassing the Cu liquidus drive...
-
Self-Propagating High-Temperature Synthesis of Fe–Mn–Si Alloy: Structure and Magnetic Properties
Abstract Fe 2 Mn 3 Si 3 -based alloy with minor cubic Heusler Fe 2 MnSi phase was prepared for the first time via self-propagating high-temperature synthesis. The reaction initiated at 668°C, reaching a maximum of 1115°C, indicating...
-
Self-Propagating High-Temperature Synthesis of Porous Hollow β-SiAlON Cylinder
Abstract In this study, porous hollow cylinders based on β-SiAlON were produced via self-propagating high-temperature synthesis (SHS). The synthesis process involved two stages: (1) the preliminary structuring of a powder mixture of...
-
Ultrasonic-Assisted Solution Combustion Synthesis of MgO Nanopowders: Microstructural Control and Functional Properties
Abstract Magnesium oxide (MgO) nanopowders were synthesized by an ultrasonic-assisted solution combustion synthesis route using magnesium nitrate as oxidizer and sucrose as fuel. The influence of ultrasonic pretreatment and...
-
Effect of Mixing Conditions on Impurity Composition and Combustion Parameters of Ti + C Mixtures
Abstract This study examines the influence of mechanical activation (MA) and initial titanium powder properties on forced self-propagating high-temperature synthesis (SHS) compaction of Ti–C mixtures. MA of pure titanium powder...
-
Synthesis of Few-Layer Graphene via Solution Combustion Method from Sucrose
Abstract Solution combustion synthesis (SCS) to make few-layer graphene (FLG) from sucrose was demonstrated. Such a mass-producible and low-cost method is competitive as a candidate for industrial production of graphene. We used sucrose...