Combustion Synthesis of W–Ni Alloy from Nickel Tungstate
Аннотация
Abstract Tungsten–nickel (W–Ni) alloys are promising materials for advanced structural and functional applications due to their unique combination of mechanical, thermal, and magnetic properties. However, their synthesis remains challenging because of the large differences in melting points and limited mutual solubility of the constituent metals. In this study, a magnesiocarbothermic combustion synthesis route for the preparation of W–Ni alloys using nickel tungstate (NiWO 4 ) as a precursor was proposed and systematically investigated. Thermodynamic calculations were performed to evaluate the feasibility of complete metal reduction and to identify optimal magnesium and carbon contents, resulting in the construction of phase domain diagrams for the NiWO 4 –Mg–C system. Nickel tungstate was synthesized via conventional furnace treatment and solution combustion synthesis (SCS), enabling assessment of precursor microstructure effects on combustion characteristics and alloy formation. Experimental results showed that the combined use of magnesium and carbon enables controlled reduction under milder temperature conditions, leading to refined microstructures. The product exhibited significantly improved compositional homogeneity compared to alloys produced from individual oxide mixtures. The use of SCS-derived NiWO 4 resulted in a porous, foam-like alloy morphology with grain sizes down to ~30 nm. The proposed approach provided an efficient and tunable pathway for the synthesis of homogeneous W–Ni alloys with controlled microstructure.