Abstract The high-temperature behavior of two refractory high-entropy alloys, Mo 24 Nb 25 Ta 12 Cr 23 Ti 16 and Nb 45 Ta 20 Hf 15 Ti 15 Cr 5 , was examined. Both materials exhibited strong thermal stability, preserving their bcc-based structures up to 900–1000°C. The Mo-containing alloy remained structurally stable after prolonged exposure at 900°C, while oxide phases such as Ti 2 O 3 and (Ti,Me)O 2 formed at 1100°C without disrupting the primary lattice. The Hf-containing alloy also maintained its single-phase bcc structure at elevated temperatures but underwent selective surface oxidation with the formation of Nb- and Ta-based oxides. In both alloys, oxidation was mainly limited to the surface layers, and the underlying bulk remained largely unaffected.
Amorphous chalcogenide materials are of increasing interest for phase-change memory and threshold-switching device applications. However, the fast-switching behavior in the nanoscale regime is difficult to confirm and characterize in...
This study investigated the gilding microstructures and manufacturing techniques of a fifth-century Silla horse-harness fitting excavated from the grave-goods compartment of Hwangnam-dong Tomb No. 120-2 in Gyeongju, Korea. The specimen...
Three-dimensional (3D) integrated one-selector one-resistor (1S1R) cross-point arrays are emerging as a leading next-generation memory technology. Achieving both nonvolatile memory switching and volatile threshold switching within a...
Anatase titanium dioxide (TiO 2 ) is widely recognized for its superior photocatalytic capabilities due to its indirect band gap, low cost, and high chemical stability compared to other oxide semiconductors. Despite its advantages, TiO...
Abstract Nano-sized α-Fe 2 O 3 powders were synthesized via a starch-assisted gel-combustion method. The effects of fuel type, equivalence ratio (Φ), and ammonium nitrate addition on phase formation and crystallite size were...