Experimental Determination of the Frequency Effect on the Dynamic Stiffness of Pipeline Compensators and Its Lowering Methods

Instruments and Experimental Techniques · Springer Nature · 2026-08-01 · DOI: 10.1134/S0040601526700278

Аннотация

Abstract— The article discusses methods for determining the dynamic stiffness dependence of liquid-filled pipeline compensators on the vibration frequency, also during the flow of liquid through the compensator and pipelines, on specially designed test benches. Data of field experiments are given, which show the increase in the stiffness modulus by a factor of 10–100 or more in comparison with the static stiffness for all types of serially produced compensators with a growth of their deformation frequency. It is shown that if there is weakly compressible working fluid, the compensator stiffness increases additionally by one to two orders of magnitude with a growth of vibration frequency, and by a factor of 10–100 if there is a flow of working fluid through the compensator. Based on the obtained study results, factors causing these phenomena have been revealed: these are the structural resonances of compensator elastic elements, pressure pulsations, and generation of vortices in the compensator and in adjacent pipelines. Methods for decreasing the influence of the above-mentioned phenomena on the increase in the pipeline compensator’s frequency dependent stiffness by means of design measures are proposed and have been validated experimentally. It is pointed out that, if the pipeline systems furnished with compensators are designed proceeding from static stiffness values of the compensators without taking into account the increase in the dynamic stiffness as a consequence of above-mentioned factors, this may entail gross errors in performing design calculations of vibration insulation along the pipeline route. It is shown that for decreasing the transfer of vibration through a compensator filled with weakly compressible liquid (water), it is insufficient to decrease only its structural dynamic stiffness. It is necessary to decrease pressure pulsations of different origins in the compensator and pipelines in the frequency range 10–1000 Hz, which is monitored in power engineering applications.

Читать у издателя →

Похожие статьи