Exergy Analysis of Parabolic Trough Collector
Аннотация
Abstract— This work presents an exergetic analysis of the commercial parabolic trough collector (PTC) used for the water desalination that has a dimensions similar to Solar Electric Generating System parabolic trough collector Model LS-2. Exergy analysis focuses on the quality of energy instead of quantity of energy and hence it is more comprehensive than energy analysis for assessing the performance of energy systems. Many researchers focuses on energy analysis and few articles considered the exergy analysis of solar PTC. Hence in this work an Engineering Equation Solver (EES) program was used for the development of the thermal model and exergetic analysis of the solar parabolic trough collector is performed. Heat transfer fluid used for the analysis was Therminol VP-1. Detailed exergetic analysis was presented for various volume flow rate of the Therminol VP-1 and various receiver tube inlet fluid temperature. Thermal model was validated with the published results. It is observed that at inlet fluid temperature 673 K and volume flow rate 200 L/min the exergetic efficiency is 38.5% whereas thermal efficiency is 64.6%. This clearly shows the difference of analysis considering quantity and quality of energy which is the major objective of this study. From the exergy distribution pattern for 25 and 200 L/min volume flow rate, it is concluded at low temperatures lower flow rate of heat transfer fluid are recommended and at high temperatures higher volume flow rate is recommended. For a volume flow rate of 25 L/min useful exergy range is 10 to 30% whereas for volume flow rate of 200 L/min useful exergy range is around 5 to 37%. Also at higher temperature and volume flow rate of a fluid exergy destruction between sun and absorber tube and the total exergy loss is smaller due to lower thermal loss that leads to higher useful exergy.