Genesis, Morphology, and Composition of Corrosion Product Dissipative Forms in the Primary Coolant of a PWR Type Nuclear Reactor
Аннотация
Abstract— The article considers regularities relating to the behavior of dissipative corrosion product (CP) impurities (solid phase particles) existing in the primary circuit of a test bench serving as a prototype of a nuclear propulsion system as suspensions and deposits. For nuclear power plants (NPPs) equipped with PWR-type reactors, reducing water chemistries (WC) are adopted, including ammonia water chemistry and ammonia-boron-potassium water chemistry with boron control. The relevance of the study is stemming from rapid development of small modular nuclear power plants (SNPPs) in sparsely populated areas of Siberia and Far East. An explanation of the mechanism governing the formation of solid phase corrosion products is proposed. The article presents the results of experiments on studying the morphology, chemical, and radionuclide compositions of CPs formed in making purposeful changes of hydrodynamic, thermophysical, and physicochemical parameters of the primary circuit of a PWR-type reactor operating with an ammonia water chemistry, which may serve to a full extent as a reference one with respect to an SNPP. Owing to the revealed regularities, it became possible to determine the optimal process parameters of reagent-free decontamination. In the case of using the design water chemistry in the primary circuit, the CP composition, the corrosion rate of structural materials, and the content of radionuclides in activated corrosion products (ACPs) are kept at levels ensuring the minimal dose burden on the personnel during the NPP operation. Long-lived radionuclides in ACPs such as 60 Со and to a certain extent 54 Мn are the main sources causing exposure of the personnel serving the NPP during repair works. In the case of using the ammonia water chemistry, the phase composition of corrosion deposits and suspensions in the coolant is determined, irrespectively of the NPP design features, by nonstoichiometric magnetite spinel, the composition of which includes elements of alloying additions and their activation products. The chemical composition of solid phase corrosion products separated from coolant samples is essentially identical with the composition of Grade 0Kh18N10T steel, which is the coolant circuit main structural material.