Verification of a Steam–Gas Mixture Analytical Model at Increased Pressures
Аннотация
Abstract The steam–gas mixture density at increased pressures is calculated. Based on the experimental data available in the literature, the compressibility factors of H 2 , He, N 2 , and O 2 gases, and deviations of steam–gas mixture pressure from Dalton’s law at the possible parameters of pressurized water reactors are analyzed. It is shown that steam pressure is the key parameter affecting the deviation of steam–water mixture pressure from Dalton’s law. The relative value by which the steam–water mixture pressure exceeds the pressure according to Dalton’s law increases with a growth of steam pressure and decreases to some extent with a growth of gas temperature and partial pressure. The steam–water mixture model on the basis of a virial equation of state with the use of real compressibility factors of components is implemented in the UROVEN-4 thermal-hydraulic computer code. The analytical model’s specific feature is that a multicomponent steam–gas mixture is considered as a binary mixture of steam and noncondensable gas that is a gas mixture composed of four components: N 2 , H 2 , He, and O 2 . The model has been verified for a steam–nitrogen mixture at a steam partial pressure up to 22 MPa, gas partial pressure up to 20 MPa, nitrogen molar fraction equal to 0.11‒0.65, and temperature up to 1000 K. It is shown that the analytical model correctly describes the value by which the steam–gas mixture pressure exceeds that according to Dalton’s law depending on the steam partial pressure, gas partial pressure, and temperature. The analytical model has been verified against the experimental data for a steam–methane mixture at a steam partial pressure up to 16 MPa under the conditions of saturated and slightly superheated steam, due to which it is possible to forecast the applicability of the model for mixtures with other nonpolar gases: H 2 , He, and O 2 .