Modeling and Thermal Performance Analysis of a Flexible Peak Shaving System for Thermal Power Units Coupled with Molten Salt Energy Storage

Instruments and Experimental Techniques · Springer Nature · 2026-10-01 · DOI: 10.1134/S0040601525601524

Аннотация

Abstract— To improve the capacity for peak shaving and the renewable energy consumption of the power grid, mining the peak shaving potential of coal-fired units and enhancing unit flexibility are the future development trends for thermal power units. In this paper, a 350 MW supercritical unit as the research object, four molten salt thermal energy storage schemes (Schemes A – D ) are proposed, which differ in the steam extraction point (live steam or steam after reheat) and the return point of the exhaust steam to the thermal cycle, as well as five energy release schemes (Schemes a – e ), which differ in the route of the heated feedwater and its injection point into the cycle. Through thermal balance calculation, the thermal performance and peak shaving capacity of each coupling scheme under five load conditions are compared and analyzed, and the system performance is evaluated by using evaluation indices such as thermal efficiency, peak shaving efficiency, peak shaving depth, and round-trip efficiency. The results show that the molten salt energy storage system significantly improves the operation flexibility of the unit, effectively alleviates the contradiction between the unit load and electricity price, and improves the peak shaving depth and peak capacity of the unit; Under the condition of energy storage, Scheme B has the highest thermal efficiency of 49.47%, the remaining three schemes are Scheme D , Scheme A and Scheme C from large to small, the maximum thermal efficiency of Scheme D is 44.27%, the maximum thermal efficiency of the remaining three schemes is Scheme A , Scheme B and Scheme C from large to small; under the condition of energy release, Scheme c has the highest thermal efficiency of 41.25%, the remaining four schemes are Scheme e , Scheme b , Scheme d and Scheme a from large to small, and Scheme b has the highest thermal efficiency of 43.89%; Under the condition of overall energy storage and release; The energy storage scheme is Scheme B , and the energy release scheme is Scheme b , which has the highest thermal efficiency and thermal efficiency, which are 44.3 and 43.37%, respectively.

Читать у издателя →

Похожие статьи