Influence of Profiling the Curving of the Tip Part of a Unshrouded Blade on its Aerodynamic Efficiency
Abstract
Abstract The development of tip clearance control and monitoring systems in gas turbines has led to a trend toward eliminating shrouds on rotor blades in a number of high-power stationary gas turbines, such as the SGT5-4000F, SGT-8000H, and others. Eliminating shrouds opens the possibility of optimizing turbine parameters, increases the degree of freedom in selecting the number of blades in the rotor, allows the reduction of rotor blades weight and, consequently, reduces the contour load on clearance above the unshrouded rotor blade (RB), which is not always possible, especially in aircraft turbines. To reduce inductive tip losses, several patents propose forming the tip area portion of the rotor blade with a slight curvature of the blade toward the suction surface in the circumferential direction. This minimizes the pressure difference between the pressure and suction surfaces near the blade tip. However, no quantitative estimates of this effect are provided. To obtain quantitative estimates of the impact of blade curvature at the tip area a computational study of the flow structure and energy loss level in the considered region was conducted using state-of-the-art CFD approaches for solving the 3D Navier-Stokes equations in a steady-state RANS formulation. In the first stage of the study, calculations were performed using the proprietary (in-house code) 3D NS software package. However, in the absence of experimental data the validation, justification and visualization of proprietary the numerical results obtained using the 3D NS program, computational studies of the flow in a rotor blade row with an open tip clearance were also conducted with the commercial software packages ANSYS FLUENT and ANSYS CFX. The computational study of the flow structure demonstrated a positive effect of this measure, resulting from a significant reduction in vortex formation zones due to flow in the tip clearance and, consequently, a reduction in losses when the rotor blade tip is tilted toward the suction surface.