A study on failure mechanism of shield tunnel face in dry and saturated sands

Discover Applied Sciences · Springer Nature · 2026-11-16 · DOI: 10.1007/s11440-026-03239-4

Аннотация

This study explored the strain softening with dilation in dry sand and static liquefaction in saturated sand, and their effects on the stability of shield tunnel faces in sandy strata. These mechanisms were first evaluated in drained and undrained triaxial tests on loose to dense sand. Then, a reduced-scale model test of a shield tunnel was conducted on dry and saturated sand with the same relative densities. The tunnel face moved backward, triggering the instability of the supported sand and a change in the support pressure. In dry loose sand, the support pressure dropped rapidly until a critical plateau, whereas in medium-dense to dense sand, it first fell to a limit value and then rose to the critical plateau. The rebound in the denser cases results from sand’s strain softening and dilation-driven expansion against the tunnel face, associated with smaller unstable zones. In saturated sand, the support pressure decreased monotonically to the critical plateau across all densities, with no rebound along the path. However, the loose saturated case developed a much larger unstable zone than its dry counterpart, due to static liquefaction-induced reduction in shear strength. Among existing theoretical models, the peak stress ratio was most effective in predicting limit support pressures in dry scenarios, whereas the instability stress ratio best predicted critical support pressure in saturated scenarios. This finding highlights the necessity of accounting for strain softening and static liquefaction, offering insights for improving theoretical models.

Читать у издателя →

Похожие статьи