Stress–dilatancy characteristics of methane hydrate-bearing carbonate sand–clayey silt and modified Rowe’s equation considering particle breakage
Abstract
Understanding the stress–dilatancy behaviour of methane hydrate-bearing specimens (MHBS) is essential for developing constitutive models. In this study, MHBS were synthesised using a mixture of carbonate sand (CS), silt, and kaolin as host matrix and the excess gas method. A series of triaxial drained tests was conducted to explore the influence of effective confining stress ( σ 3 ′ ), hydrate saturation ( S h ), and clay content ( C c ) on stress–dilatancy characteristics. The results indicate that increasing σ 3 ′ suppressed volumetric dilation by limiting particle rearrangement and enhancing particle breakage. Conversely, higher S h promoted dilation due to cementation and filling effects, which not only reduced the compressibility but also inhibited particle crushing and may have promoted the agglomeration of fine particles. An increase in C c led to greater volumetric contraction, which is attributed to the high compressibility and lubricating effect of clay, thereby facilitating particle movement while reducing breakage. Furthermore, a reference stress ratio ( M ref ), defined as the stress ratio at the maximum axial strain ( ε a ) and used as an approximation of the critical stress ratio ( M c ) for dilatancy modelling, was developed as a function of S h and C c . Additionally, Rowe’s dilatancy equation was modified by incorporating a reduction in M c to reflect the effect of particle breakage in CS. The modified equation provides improved predictions of dilatancy and has been successfully applied to other hydrate-bearing specimens with crushable materials, demonstrating broader applicability.