Stability analysis of geotextile tube tailings dams under inclined stacking: composite failure mechanism and oblique horizontal slice method

Discover Applied Sciences · Springer Nature · 2026-10-20 · DOI: 10.1007/s11440-026-03261-6

Аннотация

Geotextile tube dam technology has increasingly been used in tailings dam construction because of its construction efficiency, material adaptability, and potential for fine tailings containment. However, the layered arrangement of geotextile tubes introduces pronounced interface-controlled behaviour, and the tube interfaces may deviate from a horizontal configuration during construction, making the failure mechanism and stability assessment more complex. This study investigates the stability of geotextile tube tailings dams with inclined stacking through reduced-scale model tests and theoretical analysis. The model tests reveal a composite failure mechanism consisting of arc-shaped shear within the tailings and interfacial sliding along geotextile tube layers. Outward interface inclination promotes upward migration of the slip-surface exit, intensifies deformation localisation along tube interfaces, and reduces the bearing capacity, whereas inward inclination enhances lateral confinement and produces a more contained failure mode. Three analytical methods based on the composite slip surface were compared: the rigid geotextile tube surcharge method, the upper-bound limit analysis method, and the limit equilibrium method. Among them, the limit equilibrium method was selected for its balanced accuracy and practicality and was used as the basis for developing an oblique horizontal slice method, in which the slices are aligned with the inclined geotextile tube interfaces. The predicted composite slip surfaces and safety factors agreed well with the model test results, and the calculated safety factors showed a nonlinear decrease with increasing outward interface inclination.

Читать у издателя →

Похожие статьи