MRS Online Proceedings Library
Издатель: Springer Nature · 20 статей
-
Enhanced glass-forming ability and biocompatibility of Mg–Zn–Ca metallic glasses by Sr microalloying
In this study, the (Mg 66 Zn 30 Ca 4 ) 100- x Sr x ( x =0,0.3,0.5,0.7,1.0) metallic glasses were prepared by copper mold injection molding. The results indicate that the regulation of alloy properties by Sr addition followed a...
-
Carbon interlayers: A universal and effective approach for suppressing the shuttle effect in lithium–sulfur batteries
Due to the advantages of high theoretical capacity, high security and low cost, lithium–sulfur batteries (LSBs) have been recognized as a major research focus of next-generation energy storage technology in recent years. However, the...
-
Fast hot-pressed sintering (FHPS)-assisted synthesis mechanism of MoAlB ceramics across multi-system reactions
This study utilized direct current fast hot-pressed sintering (FHPS) technique to compare two precursor systems: Mo/Al/B (M1) and MoB/Al (M2). The effects of sintering temperature (1050 °C–1250 °C) on phase composition, microstructure...
-
Unveiling the passivation mechanism of La micro-alloyed cast-based CoCrNi medium-entropy alloys in alkaline media: From micro-galvanic corrosion to in situ surface reconstruction
Medium-entropy alloys (MEAs) were promising candidates for alkaline service environments, particularly for complex-shaped components where casting was the primary manufacturing route. However, the corrosion performance of cast alloys...
-
Structure-property correlation in solution-grown triglycine sulfate single crystals: XRD, ferroelectric, Raman and dielectric studies
Triglycine sulfate (TGS) is a model hydrogen-bonded ferroelectric material with strong relevance for room-temperature pyroelectric and infrared detector applications. In this work, TGS single crystals were grown by slow solvent...
-
Photocatalytic and thermal synthesis of ester using graphitic carbon nitride-supported cesium nanoparticles
A simple impregnation method was used to effectively produce cesium-doped graphitic carbon nitride (Cs@g-C 3 N 4 ) catalysts, which are used for the esterification of palmitic acid with methanol to produce methyl palmitate. X-ray...
-
A high-performance dual-metal-gate, double-extended-source ferroelectric tunnel junction under thermally varying conditions
In this article, a novel dual-metal-gate, double-extended-source ferroelectric tunnel junction device is analyzed and studied using a TCAD simulator. The device exhibits improved switching characteristics due to the inclusion of a...
-
Halide-controlled bandgap engineering in Cs 2 LiTlX 6 double perovskites for sustainable energy and advanced optoelectronic applications
This study explores the structural, electronic, elastic, and optical properties of double perovskite halides Cs 2 LiTlX 6 (X = F, Cl, Br, I) using density functional theory (DFT) and the full-potential linearized augmented plane wave...
-
First-principles investigation of structural, electronic, mechanical and thermoelectric properties of XPtH 3 (X=Li, Na, K, Rb) perovskites
In this work, an in-depth theoretical study was conducted on cubic hydride perovskites XPtH 3 (X=Li, Na, K, Rb) using density functional theory (DFT) implemented in the WIEN2k and BoltzTraP codes. Geometric optimization confirmed the...
-
Interface-guided, laser-induced assembly and crystallization in hybrid lead halide perovskites
Laser-trapping provides a powerful platform for manipulating micro- and nanoscale materials, yet its role in directing crystallization and assembly remains poorly understood. This study elucidates how interfacial conditions govern...
-
Shape-guided design of cisplatin-conjugated, mitochondrial-targeting gold nanoparticles for enhanced cytotoxic response in cancer cells
Cancer remains one of the most pressing global health challenges. The current treatments, like radiotherapy, chemotherapy and surgery, are often limited by severe side effects and recurrence. Nanoparticles, owing to their diverse shapes...
-
Robust metal network electrodes fabricated via electrospun fiber mask for optoelectronic applications
In this era of smart technologies, there is an increasing demand for developing highly efficient, mechanically robust transparent conducting electrodes through simple chemical fabrication techniques. The current study discusses the...
-
Microstructural evolution and mechanical characterization of friction stir-processed Al8011 hybrid metal matrix composites with TiB 2 and SiC reinforcement
Al8011 aluminium alloy is widely used in aerospace, automotive, and marine applications due to its low density, good formability, and corrosion resistance. However, its low hardness, poor wear resistance, and limited mechanical strength...
-
Influence of Mn 2+ substitution on the structural, electrical and magnetic properties of NiFe 2 O 4 nanoparticles
Inverse spinel nickel ferrite (NiFe 2 O 4 ) and manganese-substituted nickel ferrite nanoparticles (Mn x Ni (1– x ) Fe 2 O 4 ) with x = 0.0, 0.05, 0.08, 0.10 were synthesized via the sol–gel auto-combustion technique. X-ray diffraction...
-
High-performance PeDAMA 4 Pb 5 I 16 /Cs 2 SnI 6 Dion–Jacobson hybrid perovskite for self-powered photodetection and efficient photovoltaics toward imaging, sensing and communication
Dion–Jacobson (DJ) two-dimensional (2D) perovskites have recently gained attention as a promising class of materials for next-generation optoelectronics. We have designed and modeled a hybrid device integrating a PeDAMA 4 Pb 5 I 16 DJ...
-
Computational investigation of hydrogen adsorption properties of fluorinated sumanenes
The hydrogen adsorption properties of pristine and fluorinated sumanene derivatives were investigated using density functional theory and symmetry-adapted perturbation theory to assess their potential as lightweight hydrogen storage...
-
Characterization of surface-modified PVA–alginate hydrogel films for biological microparticle recovery
Abstract Polyvinyl alcohol (PVA)–sodium alginate hydrogel films were prepared and evaluated as tunable polymeric sampling interfaces for the recovery of a model biological microparticle. The aim of the study was to investigate whether...
-
First-principles investigation of uniaxial strain effects following the three directions on the structural, electronic and photocatalytic properties of iron-sillenite Bi 25 FeO 40
The physical properties of pure iron-sillenite and Bi 25 FeO 40 under uniaxial strain effect have been investigated using first-principles calculations. The magnetic properties of pure Bi 25 FeO 40 were also studied via Monte Carlo...
-
Exploring high Curie temperature and half-metallicity in Mn 2 WZ (Z = Al, Ga, Ge) full-Heusler alloys for spintronics and energy applications: An ab initio study
This study investigates the structural, mechanical, electronic, magnetic, thermodynamic, and thermoelectric properties of Mn 2 WZ (Z = Al, Ga, and Ge) full-Heusler alloys using the full-potential linearized augmented plane wave...
-
pH-responsive chitosan hydrogel-mediated NGF delivery drives enteric neural crest cell proliferation and differentiation in Hirschsprung’s disease
Hirschsprung’s disease (HSCR) is a congenital enteric neuropathy caused by impaired proliferation and differentiation of enteric neural crest cells (ENCCs). Although nerve growth factor (NGF) plays an essential role in ENCC development,...