Microstructural evolution and mechanical characterization of friction stir-processed Al8011 hybrid metal matrix composites with TiB 2 and SiC reinforcement

MRS Online Proceedings Library · Springer Nature · 2026-10-30 · DOI: 10.1007/s12034-026-03770-w

Аннотация

Al8011 aluminium alloy is widely used in aerospace, automotive, and marine applications due to its low density, good formability, and corrosion resistance. However, its low hardness, poor wear resistance, and limited mechanical strength restrict its use in high-load structural applications. To overcome the above-mentioned limitations, Al8011 hybrid metal matrix composites reinforced with 2 wt.% TiB 2 and different SiC content from 1 to 7 wt.% were fabricated through the stir casting process and further surfaced by the friction stir processing (FSP) technique. Further, microstructural analysis of friction-surfaced Al8011 hybrid metal matrix composites revealed the presence of refined equiaxed grains with uniform reinforcement distribution throughout the surface. The FSP carried out at a rotational speed of 900 rpm and traverse speed of 20 mm/min showed improved particle distribution and grain refinement within the composite matrix. Furthermore, the friction-surfaced Al8011 hybrid metal matrix composites showed improved mechanical and corrosion properties that demonstrate about 32% increase in hardness and 23% improvement in corrosion resistance. Based on the present investigation, it is concluded that the Al8011/2 wt.% TiB 2 /5 wt.% SiC composite exhibited the best overall performance for lightweight structural applications.

Читать у издателя →

Похожие статьи