Due to the advantages of high theoretical capacity, high security and low cost, lithium–sulfur batteries (LSBs) have been recognized as a major research focus of next-generation energy storage technology in recent years. However, the inevitable dissolution and migration of lithium polysulfide intermediates severely hamper its energy density and calendar life. To overcome the shuttle effect in lithium–sulfur batteries, the design of a carbon interlayer between the separator and the cathode is a promising technique. Herein, activated carbon (AC) and acetylene black (AB) as carbon interlayer of LSBs between the separator and the cathode is reported. AC possesses a rich pore structure that enables rapid physical adsorption of lithium polysulfide (LiPS), and AB has better conductivity and provides higher capacity. Thus, Li–S cells using AC carbon interlayer exhibits favorable cycling stability over long-term cycling, with a decay rate of 0.097% per cycle at 0.2 C for 500 cycles. As a contrast, the cells employing the AB carbon interlayer displayed a high initial capacity of 1667 mAh g −1 .
Carbon interlayers: A universal and effective approach for suppressing the shuttle effect in lithium–sulfur batteries. // MRS Online Proceedings Library. – 2026. – DOI: 10.1007/s12034-026-03739-9. – URL: https://link.springer.com/article/10.1007/s12034-026-03739-9
(2026). Carbon interlayers: A universal and effective approach for suppressing the shuttle effect in lithium–sulfur batteries. MRS Online Proceedings Library. https://doi.org/10.1007/s12034-026-03739-9
“Carbon interlayers: A universal and effective approach for suppressing the shuttle effect in lithium–sulfur batteries.” MRS Online Proceedings Library, 2026. doi:10.1007/s12034-026-03739-9.
@article{article34510,
title = {Carbon interlayers: A universal and effective approach for suppressing the shuttle effect in lithium–sulfur batteries},
journal = {MRS Online Proceedings Library},
year = {2026},
doi = {10.1007/s12034-026-03739-9},
url = {https://link.springer.com/article/10.1007/s12034-026-03739-9}
}
In this study, the (Mg 66 Zn 30 Ca 4 ) 100- x Sr x ( x =0,0.3,0.5,0.7,1.0) metallic glasses were prepared by copper mold injection molding. The results indicate that the regulation of alloy properties by Sr addition followed a...
This study explores the structural, electronic, elastic, and optical properties of double perovskite halides Cs 2 LiTlX 6 (X = F, Cl, Br, I) using density functional theory (DFT) and the full-potential linearized augmented plane wave...
In this article, a novel dual-metal-gate, double-extended-source ferroelectric tunnel junction device is analyzed and studied using a TCAD simulator. The device exhibits improved switching characteristics due to the inclusion of a...
A simple impregnation method was used to effectively produce cesium-doped graphitic carbon nitride (Cs@g-C 3 N 4 ) catalysts, which are used for the esterification of palmitic acid with methanol to produce methyl palmitate. X-ray...
Triglycine sulfate (TGS) is a model hydrogen-bonded ferroelectric material with strong relevance for room-temperature pyroelectric and infrared detector applications. In this work, TGS single crystals were grown by slow solvent...