Plant Foods for Human Nutrition
Издатель: Springer Nature · 19 статей
-
Capillary-Porous Characteristics of Nonwoven Materials Based on Polyester Fibers
The structures of various types of Stelan nonwoven insole materials with adsorbent fibers (bamboo, corn, flax) were studied on macro- and mesoscales. Their wicking, sweat permeability, and hydrophysical properties were evaluated....
-
Potential for Manufacturing Chemical Fibers Based on Graphene-Containing Materials
The research was dedicated to a complex analysis focused on economic and ecological aspects of the potential and problems of implementing graphene-modified chemical fibers into industrial manufacturing. The work was timely because of a...
-
Preparation of Composite Dielectrics for the Microwave Range Based on Benzocyclobutene Copolymers and Fiberglass Filler
The ability to use solutions of benzocyclobuten-4-ylvinyldimethylsilane copolymer as a polymer binder in composite materials was demonstrated. The thermal and dielectric properties of the obtained fiberglass laminates allow them to be...
-
Spontaneous Elongation of AB-Polybenzimidazole Fibers in Superbasic and Acidic Media
Dissolution of AB-polybenzimidazole (ABPBI) fibers in superbasic and protic solvents was qualitatively compared. The fiber exhibited pronounced enhancement of birefringence and self-elongation upon swelling in phosphoric acid that was...
-
Preparation and Characterization of Spinning Solutions and Meta-Aramid Fibers Based on Secondary Resources
Results from characterization of spinning solutions obtained using meta-aramid wastes from fabrication of special clothing and fully used special clothing are reported. Recycling technology for fibers including stages of fabric...
-
Development of Conditions for Preparing Fibrous-Porous Composite Materials from Solutions of Various Brands of Polyurethane
Domestic and foreign brands of polyesterurethanes (PEUs) were comparatively analyzed to reveal the possibility of processing their solutions. A relationship was found between PEU chemical compositions and their behavior during structure...
-
Structural and Chemical Transformations of Polycaproamide Fiber Modified with Siloxane Rubber During Thermolysis
Results from IR spectroscopic and elemental analysis studies of structural and chemical transformations of starting polycaproamide fiber and that modified by siloxane rubber, preoxidation, and carbonization are reported. Double bonds,...
-
Fabrics for Workwear that Provide Comfortable Wear Conditions
The results of the study of hygroscopicity and moisture releasing capacity of cotton and aramid fabrics, which are the primary properties characterising comfortable workwear use conditions, are presented. The properties of...
-
Predicting Fiber-Reinforced Parts for Railroad Construction by Prototyping at the Polyamide-6 Synthesis Stage
The properties of models of lateral support of reinforced concrete rail fastenings made of fiber-reinforced polyamide composites have been studied by prototyping method using T-FLEX CAD software, which enabled analysis of the...
-
Modification of Polyurethane Solutions by Hydrophilic Polymers to Create Fibrous-Porous Composite Materials and Facing Layers of Synthetic Leathers
Results of targeted modification of dimethylformamide solutions of polyesterurethanes (PEUs) by poly(vinyl alcohol) (PVA), poly(acrylic acid) (PAA), and collagen hydrolysate (PRC) to create fibrous-porous composite materials and facing...
-
Effect of Polycondensation Filling of a Polymer Fibrous System on the Morphology and Elemental Composition of Polikon C Cation-Exchange Membrane
Results from development of a Polikon C cation-exchange membrane by polycondensation filling in situ based on novolac phenol-formaldehyde fibrous material are reported. The use of a fibrous matrix as a nanoreactor was shown to allow the...
-
Modeling Degree of Impregnation of Nonwoven Needle-Punched Fabric from Polypropylene Fibers with Polyurethane Dispersion
A model has been developed to predict the degree of impregnation of a fabric made of polypropylene fibers with a linear density of 0.66 tex and a bulk density of 85 kg/m 3 based on two technological variables, such as the polyurethane...
-
Evaluation of the Possibility of Using Oxidized Polyacrylonitrile Cord Modified By Finish AGM-9 to Reinforce Epoxide Composite Materials
Curing of epoxide binder in the presence of oxidized PAN-TT modified by AGM-9 was shown to occur under milder conditions than for unfilled matrices. This was probably due to chemical interaction between organic functional groups of...
-
Synthesis of Colored Chitosan Derivatives and Their Use for Combined Dyeing and Finishing
Modification of chitosan of various molecular masses by active (black 4CT) and acidic dyes (violet 43) to produce new colored biopolymer derivatives was studied. The synthesis conditions, including reagent concentrations, temperature,...
-
Effect of Filtering Materials Used for Ultra-High-Molecular-Weight Polyethylene Spinning Solution on Mechanical Properties of Oriented Yarn
Volumetric filters with low hydraulic resistance were shown to be advisable for filtering viscoelastic ultra-high-molecular-weight polyethylene (UHMWPE) spinning solutions. Solution flow through them is not associated with a significant...
-
Influence of Fibrous Filler Composition on Hardness of Composite Polishing Material
The hardness of composite materials obtained by impregnating nonwoven needle-punched fabrics made of polyethylene terephthalate and polyacetal fibers with an aqueous polyurethane dispersion was studied and depended on the formation of...
-
Flexible Thermal Protection System for Aircraft Vehicles from Russin High Temperature Textile Materials
The article discusses the development of flexible thermal protection system for aircraft made from high temperature materials produced in Russia. The obvious advantages of flexible thermal protection should be exploited by developers of...
-
Development of Carbon Sorbents Modified with Nanoparticles and Studies of Their Properties
Results from the development and studies of carbon sorption-active fibrous materials modified with two types of nanoparticles, i.e., water-soluble fullerenes and fullerene-containing soot, are reported. The main sorption characteristics...
-
Comparative Evaluation of Deformation−Recovery and Shrinkage Properties of Aramid Textile Yarns
The development of numerical methods for predicting deformation-recovery processes in aramid textile yarns allows the properties of these materials to be comparatively analyzed, the relationship between mechanical properties and...