The hardness of composite materials obtained by impregnating nonwoven needle-punched fabrics made of polyethylene terephthalate and polyacetal fibers with an aqueous polyurethane dispersion was studied and depended on the formation of an intermediate layer during the fabric puncture process in which the packing density of fibers oriented parallel to the fabric surface exceeded the packing density of the fibers in the bulk. Polyurethane particles were concentrated predominantly in the intermediate layer. The maximum hardness of composite materials based on fabrics made of fibers of different chemical natures was observed for a degree of impregnation of ~0.1. Increasing the degree of impregnation led to a decrease in the hardness of the composite materials that was associated with limited fiber mobility and the generation of localized stresses during indentation.
Influence of Fibrous Filler Composition on Hardness of Composite Polishing Material. // Plant Foods for Human Nutrition. – 2025. – DOI: 10.1007/s10692-026-10650-w. – URL: https://link.springer.com/article/10.1007/s10692-026-10650-w
(2025). Influence of Fibrous Filler Composition on Hardness of Composite Polishing Material. Plant Foods for Human Nutrition. https://doi.org/10.1007/s10692-026-10650-w
“Influence of Fibrous Filler Composition on Hardness of Composite Polishing Material.” Plant Foods for Human Nutrition, 2025. doi:10.1007/s10692-026-10650-w.
@article{article36444,
title = {Influence of Fibrous Filler Composition on Hardness of Composite Polishing Material},
journal = {Plant Foods for Human Nutrition},
year = {2025},
doi = {10.1007/s10692-026-10650-w},
url = {https://link.springer.com/article/10.1007/s10692-026-10650-w}
}
Volumetric filters with low hydraulic resistance were shown to be advisable for filtering viscoelastic ultra-high-molecular-weight polyethylene (UHMWPE) spinning solutions. Solution flow through them is not associated with a significant...
Modification of chitosan of various molecular masses by active (black 4CT) and acidic dyes (violet 43) to produce new colored biopolymer derivatives was studied. The synthesis conditions, including reagent concentrations, temperature,...
Curing of epoxide binder in the presence of oxidized PAN-TT modified by AGM-9 was shown to occur under milder conditions than for unfilled matrices. This was probably due to chemical interaction between organic functional groups of...
A model has been developed to predict the degree of impregnation of a fabric made of polypropylene fibers with a linear density of 0.66 tex and a bulk density of 85 kg/m 3 based on two technological variables, such as the polyurethane...
Results from development of a Polikon C cation-exchange membrane by polycondensation filling in situ based on novolac phenol-formaldehyde fibrous material are reported. The use of a fibrous matrix as a nanoreactor was shown to allow the...