Journal of Polymers and the Environment
Издатель: Springer Nature · 19 статей
-
Calculation of performance of a rotary mixer for solid dispersed polymeric components
The calculation of a rotary mixer was carried out based on a stochastic approach to modeling the mixing process of solid dispersed polymeric components, taking into account the peculiarities of motion of component particles in the...
-
Enhancing the performance of reciprocating compressors
This study discusses an option for combating the harmful space of reciprocating compressors by installing an elastomeric disk made of HNBR-70 type rubber at the piston end. The required disk thickness was calculated to exclude a...
-
Reduction of energy consumption for pumping heat carriers while ensuring the required amount of transferred heat in plate heat exchanger
The average difference between hot and cold heat carrier temperatures, the amount of transferred heat, and the hydraulic resistance for a patented plate heat exchanger having plates with drop-shaped relief and for a heat exchanger...
-
Improving efficiency of flat-chamber electrobaromembrane device for solution separation
The design of a flat-chamber type of electrobaromembrane device for cleaning technolo gical solutions of chemical, machine-building and agroprocessing industries is updated. The design of such a device is analyzed and the operation of...
-
Catalytic activity and stability of ethanol oxidation catalysts based on transition metals and transition metal spinels in alkaline ethanol media
This paper presents the results of a study of the catalytic activity of copper (Cu) electrodes, including gold (Au)-plated ones coated with nickel (Ni) foam, oxides, and hydroxides of iron (Fe) and cobalt (Co) in strongly alkaline...
-
Experimental studies of bulk components mixing process in a centrifuge with alternating channels and blades
Analysis of the results of experimental studies of bulk materials mixing process in a developed laboratory centrifuge having an adapter with alternating radial channels, nozzles and blades showed that the operating parameter of the...
-
Experimental study of the hydraulic resistance of plate modules of a heat and mass transfer device
The results of an experimental study into the hydraulic resistance of heat exchange modules, which are part of a heat and mass-exchange device, are presented. Literature data on the study of hydraulic resistance in plate heat...
-
Experimental aggregative stability study of Ag/PVP nanoparticles in colloidal solutions, based on the water, propylene glycol-water, and isopropanol systems
We investigate the aggregative stability of Ag/PVP nanoparticles (0.1 and 0.3 wt% of Ag) in colloidal solutions, based on isopropanol, water, and a propylene glycol-water mixture, promising for the application as secondary coolants. The...
-
Updating of groundwater cleaning technology based on ultrasonic galvanocoagulation method
The results of experiments on ultrasonic galvanocoagulation groundwater cleaning are presented. Recommendations are offered for updating the cleaning system of waterworks, based on the developed hardware-technological scheme having a...
-
Study of the influence of catalyst on wet biomass torrefaction process in fluidized bed with superheated steam
A comparative study of the process of biochar (a material for synthesizing sorbents) production by wet torrefaction of hazelnut shells in a fluidized bed with superheated steam without and with use of a catalyst (olivine sand) was...
-
Numerical study of multicomponent mixed refrigerant composition regulation during natural gas liquefaction
One of the promising directions of energy efficiency enhancement and operating cost reduction when small-scale natural gas liquefaction plants where mixed refrigeration machines are employed is the use of mixed refrigerant composition...
-
Calculation of the parameters of refrigerant vapor when compressed in a scroll compressor
The paper presents a method for calculating the thermodynamic parameters of refrigerant vapors during their compression in a scroll compressor. The method takes the properties of a refrigerant as a real gas into account, as well as the...
-
Influence of the dead space volume on the working processes and performance of a piston hybrid power machine with two suction valves
The impact of dead space volume on the working processes of a positive-displacement piston hybrid power machine (PDPHPM) with two suction valves is investigated. Due to the fact that the process of back expansion in this machine...
-
Method for determining heat inputs and drainless storage duration of liquefied natural gas in a cryogenic tank
Ensuring safe and long-term storage of liquefied natural gas (LNG) is essential for improving the environmental and cost effectiveness of LNG-based power plants. A method for calculating heat fluxes from the environment to the working...
-
Effect of Ag/PVP nanoparticle additives on the specific heat capacity of secondary coolants, based on the water, propylene glycol–water, and isopropanol systems
In this paper, we investigate the effect of adding silver (Ag) nanoparticle coated with polyvinylpyrrolidone (PVP) at an Ag concentration of 0.3 wt% in base coolant fluids, which are based on the “water,” “propylene glycol–water,” and...
-
Study of the structure and operational properties of the surface layer of 60S2A steel subjected to combined EMT + SPD hardening
In this work, the fine structure and mechanical properties of the surface white layer of 60S2A steel subjected to combined strengthening by electromechanical treatment with finishing surface plastic deformation are studied. The electron...
-
Effect of thickness of wall of polypropylene raschig rings and method of their manufacture on materials consumption of dumped mass-exchange packings
The article presents a comparative analysis of the methods for manufacturing polypropylene Raschig rings (taking account of consumption coefficients in manufacture of thermoplastic products) on the example of mass-exchange packings for...
-
Modernization of the tread extrusion head of the MCH-200 screw machine
The hydrodynamics of the existing basic extrusion head of the MCH-200 screw machine were calculated using ANSYS. Pin extrusion was proposed for head modernization. A new simpler head design was developed using the directional search...
-
Cold accumulators using binary ice in air conditioning systems
This article presents a study of cold accumulators using binary ice in air conditioning systems. The main advantages and disadvantages of conventional methods for producing binary ice are considered. An installation for obtaining binary...