The calculation of a rotary mixer was carried out based on a stochastic approach to modeling the mixing process of solid dispersed polymeric components, taking into account the peculiarities of motion of component particles in the forming rarefied flows, including the electrostatic effect and collisions. The obtained performance calculations were compared with the test results of an experimental unit with a two-stage mixing of components, i.e., ellipsoidal polypropylene particles (secondary and primary) in the ratio of 1:9. The research established a weak nonlinearity of regression dependencies of performance on the rotational speed of mixing drums, as well as a weak quadratic dependence of the total flow rate of components on the angular rotation rate of drums at a satisfactory agreement with the experimental data (relative error of 5–10%). A 1.06-fold increase in the angular rotation rate of drums leads to a 1.28-fold increase in the performance. The main parameters that significantly affect the performance of the rotary mixer were determined.
Calculation of performance of a rotary mixer for solid dispersed polymeric components. // Journal of Polymers and the Environment. – 2023. – DOI: 10.1007/s10556-024-01276-y. – URL: https://link.springer.com/article/10.1007/s10556-024-01276-y
(2023). Calculation of performance of a rotary mixer for solid dispersed polymeric components. Journal of Polymers and the Environment. https://doi.org/10.1007/s10556-024-01276-y
“Calculation of performance of a rotary mixer for solid dispersed polymeric components.” Journal of Polymers and the Environment, 2023. doi:10.1007/s10556-024-01276-y.
@article{article36244,
title = {Calculation of performance of a rotary mixer for solid dispersed polymeric components},
journal = {Journal of Polymers and the Environment},
year = {2023},
doi = {10.1007/s10556-024-01276-y},
url = {https://link.springer.com/article/10.1007/s10556-024-01276-y}
}
This article presents a study of cold accumulators using binary ice in air conditioning systems. The main advantages and disadvantages of conventional methods for producing binary ice are considered. An installation for obtaining binary...
The hydrodynamics of the existing basic extrusion head of the MCH-200 screw machine were calculated using ANSYS. Pin extrusion was proposed for head modernization. A new simpler head design was developed using the directional search...
The article presents a comparative analysis of the methods for manufacturing polypropylene Raschig rings (taking account of consumption coefficients in manufacture of thermoplastic products) on the example of mass-exchange packings for...
In this work, the fine structure and mechanical properties of the surface white layer of 60S2A steel subjected to combined strengthening by electromechanical treatment with finishing surface plastic deformation are studied. The electron...
In this paper, we investigate the effect of adding silver (Ag) nanoparticle coated with polyvinylpyrrolidone (PVP) at an Ag concentration of 0.3 wt% in base coolant fluids, which are based on the “water,” “propylene glycol–water,” and...