Food Science and Biotechnology
Издатель: Springer Nature · 20 статей
-
Experimental study of the liquid droplet shape upon separation from a cylindrical nozzle
The dynamics of liquid droplet formation and separation in a periodic dripping regime was experimentally studied on tubes with an outer diameter in the range of 0.5 ÷ 4 mm. Water, ethanol, a 40 % water-ethanol solution, and glycerin...
-
Modeling of jet flows for straight and angled nozzles in air-plasma powder spraying
Comparative modeling of plasma jets generated by a direct-current plasma torch using straight and angled nozzles was carried out. The geometry of the angled nozzle developed by the authors was numerically analyzed; this nozzle was...
-
Droplet deposition on a wall from a two-phase turbulent unsteady flow with peripheral swirl
Water droplet deposition from a turbulent pulsed two-phase flow in a cylindrical channel with peripheral swirling was numerically simulated using the Eulerian description with varying initial mass concentration of water droplets. The...
-
Propagation of temperature waves in areas with a phase transition
The process of temperature waves propagation was studied numerically for a case of phase transition in a substance that completely occupies an area (plate, cylinder, or sphere). The temperature varies according to a harmonic law at the...
-
Study of the heat flux density effect on the pressure drop of two-phase gas-liquid flows in a slit microchannel
The influence of heat flux density on the pressure drop of two-phase gas-liquid flows in a slit microchannel with local heating was experimentally studied at a fixed liquid mass velocity and varying mass velocities of gas. It was shown...
-
Gas-jet deposition of diamond coatings with activation of precursor gases by microwave discharge: features, possibilities, and prospects
A gas-jet method for depositing diamond coatings with gas activation by a microwave discharge is considered. A distinctive feature of this method is the use of a high-speed jet to transport gases activated in microwave plasma in the...
-
Effect of periodic heat addition on the structure of supersonic turbulent flow in a channel with sudden expansion
The paper presents the results of numerical modeling on the effect of periodic volumetric heat release on a supersonic turbulent flow in a plane suddenly expanded channel, including conjugate heat transfer with sensitive elements of...
-
Investigation of heat transfer in a thermoelectric cooling system
The paper presents the results of measurements and calculations for key parameters of a thermoelectric cooling system. Measurements on temperature and electrophysical parameters at different temperature conditions and operation modes...
-
About the influence of carbon nanotubes on rheological and viscoelastic properties of polyacrylamide aqueous solutions
This paper presents a comprehensive study on rheological and viscoelastic properties of aquatic solutions of polyacrylamide (PAM) which is modified by single-walled carbon nanotubes (SWCNTs) and multiwalled carbon nanotubes (MWVNTs)....
-
Experimental study of the motion and shape of a Taylor vapor bubble floating in a channel at saturation pressure
The dynamics of the Taylor vapor bubble rise in a circular (16 mm cross-sectional diameter) and annular (25 and 16 mm cross-sectional diameters) channel at saturation pressure was experimentally studied. The bubble formed during boiling...
-
Experimental study of heat transfer of a sphere levitating in a channel
The paper presents experimental results on heat transfer rate for a spherical body under the condition of aerodynamic lifting (free levitation) in airflow within a diffuser channel. The temperature of the heated surface and the sphere...
-
Instantaneous wave structure of localized secondary instabilities of a swept-wing boundary layer
A detailed systematic experimental study of four types of high-frequency and medium-frequency secondary instability of a swept-wing boundary layer has been carried out under conditions of predominance of the stationary primary...
-
Liquid film thickness in a flat minichannel in turbulent gas-liquid film flow
This work deals with an experimental study of the thickness of a water film driven by a turbulent gas flow in a flat minichannel. It has been found that the transition from macro- to minichannels can lead to a significant reduction in...
-
Ethanol phase-equilibrium curve with account for renormalization group and Clapeyron–Clausius equation
This paper presents the developed elasticity line eqiuations for ethanol, vapor and liquid branches of coesistence and “apparent” heat of vaporization r *. They describe the phase-equilibrium curve in a temperature range from the triple...
-
Supersonic turbulent boundary layer under conditions of distributed positive air mass transfer through a permeable surface
The paper presents experimental study on efficiency of controlling a supersonic turbulent boundary layer on a flat surface by positive-directed air mass transfer via a finely perforated wall. Experiments were performed for a flow with...
-
Effect of air amount in a gasification chamber on the operating parameters of a burner with superheated steam atomization
The thermal and environmental characteristics of liquid hydrocarbon fuel combustion in a steam-atomizing burner with a gasification chamber under limited air supply to the chamber and various power settings were studied. For the first...
-
Effect of the diffuser divergence angle on characteristics of turbulent flow with different swirl intensity
The effect of the conical diffuser divergence angle and the flow swirl intensity on the characteristics of turbulent flow and the precessing vortex core that forms within it was studied experimentally. Laser Doppler anemometry was used...
-
Study of energy parameters in non-equilibrium supersonic jets at low gas pressure using the data from molecular-beam diagnostics
The paper deals with an issue of extending the experimental capabilities in the study of gas dynamics for rarefied gas jets through using new diagnostic tools for evaluating the energy parameters of a flow. The study considers the known...
-
Mesoscopic-scale modeling of three-phase processes in porous media
The paper presents a numerical model for multiphase immiscible flows in porous media which is based on the lattice Boltzmann method (LBM) using a color gradient approach. This study accomplishes an algorithm of assigning the arbitrary...
-
Effect of passive perturbation from an obstacle on heat transfer in a turbulent bubble flow: experiment and numerical simulation
The influence of a passive perturbation from a vortex-generating rib on heat transfer in a bubble flow in a flat channel was studied experimentally and numerically. Wall temperature measurements were taken using an IR camera. Unsteady...