Comparative modeling of plasma jets generated by a direct-current plasma torch using straight and angled nozzles was carried out. The geometry of the angled nozzle developed by the authors was numerically analyzed; this nozzle was created for air-plasma spraying of powder coatings onto the inner surfaces of small-sized parts. The gas dynamics of the mixing of a high-temperature plasma gas jet with flows of cold carrier and focusing gases in the nozzle was studied. The proposed aerodynamic model and calculation algorithm were validated by comparison of the coordinates of shock diamonds along the jet length in the off-design mode of plasma torch operation, which showed acceptable agreement with full-scale experiments. The effect of wall cooling on the jet enthalpy was calculated, and its significant role was demonstrated in the case of using an angled nozzle. The distances and optimal gas flow rates at which the velocity and temperature profiles along the jet cross-section acquire an axisymmetric and uniform appearance were determined.
Modeling of jet flows for straight and angled nozzles in air-plasma powder spraying. // Food Science and Biotechnology. – 2026. – DOI: 10.1134/S086986432603011X. – URL: https://link.springer.com/article/10.1134/S086986432603011X
(2026). Modeling of jet flows for straight and angled nozzles in air-plasma powder spraying. Food Science and Biotechnology. https://doi.org/10.1134/S086986432603011X
“Modeling of jet flows for straight and angled nozzles in air-plasma powder spraying.” Food Science and Biotechnology, 2026. doi:10.1134/S086986432603011X.
@article{article36035,
title = {Modeling of jet flows for straight and angled nozzles in air-plasma powder spraying},
journal = {Food Science and Biotechnology},
year = {2026},
doi = {10.1134/S086986432603011X},
url = {https://link.springer.com/article/10.1134/S086986432603011X}
}
A detailed systematic experimental study of four types of high-frequency and medium-frequency secondary instability of a swept-wing boundary layer has been carried out under conditions of predominance of the stationary primary...
The paper presents experimental results on heat transfer rate for a spherical body under the condition of aerodynamic lifting (free levitation) in airflow within a diffuser channel. The temperature of the heated surface and the sphere...
The dynamics of the Taylor vapor bubble rise in a circular (16 mm cross-sectional diameter) and annular (25 and 16 mm cross-sectional diameters) channel at saturation pressure was experimentally studied. The bubble formed during boiling...
This paper presents a comprehensive study on rheological and viscoelastic properties of aquatic solutions of polyacrylamide (PAM) which is modified by single-walled carbon nanotubes (SWCNTs) and multiwalled carbon nanotubes (MWVNTs)....
The paper presents the results of measurements and calculations for key parameters of a thermoelectric cooling system. Measurements on temperature and electrophysical parameters at different temperature conditions and operation modes...