MAPAN
Издатель: Springer Nature · 20 статей
-
Fading fission in Western economies: structural limitations and the uncertain role of small modular reactors
Despite more than eight decades of development, nuclear power continues to exhibit structural challenges in achieving standardized, cost-effective, and timely deployment, particularly in Western economies. This study examines recent...
-
Experience and development prospects of the NIKIET JSC in the field of control systems and equipment for nuclear power facilities
The paper presents the main results and prospects for the development of control systems and equipment by the NIKIET JSC (Moscow, Russian Federation) for nuclear power facilities. The previous experience formulated a strategic line in...
-
Post-reactor studies of materials in experimental fuel rods of a BN-800 core design. Part 1
Background Despite the successful operation of the BN-800 reactor during 2015–2025 and its transition to full core loading with MOX fuel pellets, no materials science data are available on the actual state of fuel assemblies and fuel...
-
Sorption recovery of xenon and krypton from the carrier gas in the gas treatment system of a molten-salt reactor
Background Radioactive isotopes of krypton and xenon comprise the bulk of the radiation dose from the molten-salt reactor, which is the closing link of the nuclear fuel cycle, intended for the transmutation of minor actinides. The...
-
Preservation and development of test and experimental facilities for comprehensive validation of next-generation reactor plants and support of existing technologies
Experimental test facilities simulating the real operating conditions of equipment are used to verify the performance of products, units, and structures of nuclear reactor plants. The present article reviews test and experimental...
-
Evolution of operational diagnostic and non-destructive testing systems for nuclear power facilities
The article covers the development and implementation of integrated systems of technical diagnostics and non-destructive testing set in the design of nuclear reactors, as applied to the projects of the NIKIET JSC (Moscow, Russian...
-
Results of developing fuel assemblies for research reactors
The paper reviews the status of work by the NIKIET JSC (Moscow, Russian Federation) in the area of developing fuel assemblies (FAs) for various types of research reactors under construction and operation in our country and abroad. For...
-
Fusion neutron source as a platform for the development of hybrid fusion-fission technology
The NIKIET JSC (Moscow, Russian Federation) develops a blanket design for producing nuclear fuel in a hybrid fusion-fission plant. The present paper reviews the issues and challenges solved within the framework of these activities. A...
-
R&D program for justifying the molten-salt research reactor facility: results and prospects
The paper considers the R&D program to justify the molten-salt research reactor (MSRR), which is considered as a prototype of a reactor for burning long-lived actinides, mainly americium and curium, from spent fuel of power reactors....
-
Computational simulation of experiments performed using the BFS-2 critical facility to substantiate the BREST-OD-300 reactor design
The present paper considers the computational simulation of experiments performed on the BFS-88 critical assembly, which is a full-scale model of the BREST-OD-300 reactor core. Experimental research included the study of neutronic...
-
Innovative structural materials for advanced nuclear reactor systems: development, performance testing, and industrial implementation
The development of advanced structural materials is a prerequisite for the feasibility of next-generation reactor projects. Current widely used steels and alloys fail to fully meet the requirements of these projects, while most...
-
Development and justification of a lead-cooled reactor for the generation IV nuclear power system
The present article examines the development and justification of an innovative reactor technology based on the BEST-OD300 fast lead-cooled reactor with inherent safety and mixed uranium-plutonium nitride fuel for operation in a closed...
-
Innovative design and safety assessment of the SHELF-M reactor system for a small modular reactor (SMR) plant
The article substantiates the need for the development of a small modular reactor (SMR) plant for decentralized power supply to remote regions. Key 2022–2024 R&D results on the development of the engineering design of the SHELF‑M...
-
Scientific and technical issues of the MBIR construction project and their solution
The construction of a nuclear facility with a multipurpose fast research reactor assumes engineering challenges that require prompt and effective solutions. A wide range of work was carried out to ensure the MBIR project timelines:...
-
Effects of input uncertainty characteristics on the statistical analysis of thermal-hydraulic calculations
Background The safety of nuclear facilities (NFs) should be justified using qualified software tools. However, the procedure for validating thermal-hydraulic computer codes requires assessing the uncertainty and sensitivity of...
-
Simulated contamination of concrete surfaces with radioactive substances generated during nuclear power plant operation
Background Decontamination of concrete structures from radionuclides represents the most important task of decommissioning nuclear hazardous facilities. Relevant decontamination results obtained preferably without using...
-
Features of safety regulation of reactors with molten salt nuclear fuel
Background Over the next decade, the Russian Federation is planning to construct a research molten salt reactor. The purpose of this reactor is to demonstrate the feasibility of burning minor actinides with molten salt nuclear fuel. The...
-
Modeling and comparative assessment of scenarios for deployment of nuclear hydrogen production in russia. Part 1
Background The application of nuclear energy for hydrogen production is considered in strategic documents of both Russia and other countries. A comparative study of scenarios for deployment of nuclear-hydrogen production allows its...
-
Development of technological solutions for decommissioning equipment and systems of separate rooms in units no. 1 and 2 of the Leningrad NPP. Part 1
Background: In the Russian Federation, immediate dismantling was adopted as the main option for decommissioning nuclear power plants (NPPs) with RBMK-1000 reactors. Units No. 1 and 2 of the Leningrad NPP (Sosnovy Bor, Russian...
-
Simulation of an absorption refrigerator operated in the passive heat removal system of a nuclear reactor
Background Improving the safety of nuclear power plants with water-water (VVER) reactors requires the development of passive heat removal systems (PHRSs), especially for complete blackout conditions. An important aspect of the research...