Post-reactor studies of materials in experimental fuel rods of a BN-800 core design. Part 1

MAPAN · Springer Nature · 2026-09-08 · DOI: 10.1007/s10512-026-01290-8

Аннотация

Background Despite the successful operation of the BN-800 reactor during 2015–2025 and its transition to full core loading with MOX fuel pellets, no materials science data are available on the actual state of fuel assemblies and fuel rods irradiated in this reactor. Thus, it is advisable to use the data archive of the Institute of Reactor Materials JSC (Zarechny, Sverdlovsk Oblast, Russian Federation) on the post-reactor state of BN-800 fuel rod prototypes, which were operated in 2010–2012 under conditions of a lower power BN-600 reactor. Aim To present the individual results of post-reactor studies of BN-600 model fuel rods (BN-800 fuel rod prototypes) that retained their integrity after irradiation in the current conditions of BN-800. Materials and methods BN-600 model fuel rods have the structural and geometric design of the BN-800 core with a cladding of advanced Cr16-Ni15 steel and a pellet core made of MOX fuel bushings. The maximum values of the damaging dose, burnup of materials, and the temperature of fuel claddings were 84.7 dpa, 11.6% FIMA, and 600–650 °C, respectively. Post-reactor studies of materials were carried out by gamma scanning, profilometry, hydrostatic density measurement, metallography, and X-ray diffraction analysis. Results One of the main performance parameters (vacancy swelling) of BN-800 fuel rod prototypes had values typical of the regular BN-600 fuel rods, including earlier studies of experimental BN-600 MOX fuel performed until 2003. Individual structural characteristics of MOX fuel, including the behavior of aggressive fission products, mass transfer of fuel, and matrix inclusions of depleted UO 2 globules had no dominant effect on the performance of model BN-800 fuel rods. Conclusion Archive data on the behavior of model BN-600 fuel rods with a design similar to BN-800 in more stringent conditions indicate a safe level of control material parameters for BN-800 fuel rods and justify the prospect for increasing their future performance with MOX fuel in claddings of more radiation-resistant steels. The next publication “Post-reactor studies of materials in experimental fuel rods of a BN-800 core design. Part 2” will present the analysis of other significant performance parameters, such as corrosion and mechanical properties of claddings and the state of welded joints in BN-800 fuel rod prototypes.

Читать у издателя →

Похожие статьи