Engineering in Extreme Environments
Издатель: Springer Nature · 20 статей
-
Design of a low-power digitally controlled oscillator using a tunable delay element in 90-nm CMOS technology
In this article, a novel delay element (DE) is proposed as the core component of a digitally controlled oscillator (DCO). For precise frequency control, digitally controlled switches using MOS varactors are employed in the proposed...
-
Simulation-based investigation of asymmetric dual-material dielectric engineering in AlGaN/GaN MOS-HEMTs for enhanced DC, RF, and switching performance
Gate leakage current, parasitic gate–drain capacitance, and electric-field crowding remain key challenges in AlGaN/GaN MOS-HEMTs for high-frequency applications. To address these limitations, a Dual-Material Asymmetric Dielectric...
-
Design of a Bio-Inspired CMOS neural stimulator circuit using spike-shaped waveforms for improved energy efficiency
Rectangular pulse waveforms have long been the standard for neural tissue stimulation. However, energy efficiency—defined by reduced energy consumption—can be significantly improved when the applied waveform closely resembles the...
-
Correspondence: fundamental theoretical and mathematical flaws in “Enhancing phase noise performance in cross-coupled LC oscillators through switch transistor current shaping”
This correspondence provides a mathematically grounded critique of the paper by Yazdani, Jalali, and Hashemipour [1]. Three categories of severe errors are identified and analysed. First, the reported work fundamentally misinterprets...
-
Optimized CNTFET based PFSCL circuits for improved delay and energy-delay performance
Positive feedback source coupled logic (PFSCL) is a logic style that uses constant current operation and positive feedback to achieve high switching speed and low power consumption making it suitable for high-performance mixed-signal...
-
A novel reconfigurable wearable textile antenna with DGS enabled wide bandwidth for biomedical applications
In this proposed work, a wearable textile antenna is proposed for Wireless body area network (WBAN) band application at the resonating frequency of 2.4 GHz. The antenna’s overall dimensions are $$20 \times 26 \times 0.8$$mm 3 , and its...
-
An Efficient Master–Slave Flip-Flop Using DTMOS Technique
A novel master slave flip is designed to minimize power and delay. This design incorporates a single-phase clock, 16 transistors with adaptive coupling techniques. In this design Dynamic threshold MOS (DTMOS) technique is applied, which...
-
A low-power CMOS spiking neuron design with frequency adaptation in 180 nm technology at 300 mV supply
This paper presents a low-power conductance-based Leaky Integrate-and-Fire (LIF) spiking neuron in TSMC 180-nm CMOS technology operating at 300 mV supply. The circuit uses a Differential Pair Integrator (DPI), an enhanced positive...
-
A high-efficiency class J −1 power amplifier with cascaded output matching techniques for body-centric wireless communications
Design and analysis of the performance of an inverse Class-J power amplifier (PA) with cascaded output matching techniques in a broad bandwidth are presented. To meet the requirements of the second harmonic termination, PA operates in...
-
A novel quad-gate MOS-HEMT device for analog/RF applications
This paper presents a novel quad-gate metal–oxide–semiconductor (MOS) high electron mobility transistor (HEMT) (MOS-HEMT) structure for enhanced Analog/radio-frequency (RF) performance of gallium nitride (GaN) devices. This study shows...
-
Energy efficient approximate full adder design using nano scale technology for image processing
Portable multimedia devices with multiple signal processing techniques and architectures require low power consumption. Earlier research has relied on voltage over-scaling to exploit error resilience, limiting errors through...
-
Design and optimization of low-power approximate multipliers for error-tolerant image processing and CNN applications
In error-tolerant applications such as image processing and neural network acceleration, the design of low-power architectures is critical. Approximate computing has emerged as an effective paradigm for developing energy-efficient...
-
Theoretical design of a metamaterial-based antipodal vivaldi antenna with modifications in radiation slots and feed-line section for wideband applications
A key challenge in wideband antenna design is the inherent trade-off between achieving wider bandwidth and maintaining high gain, as well as balancing structural modifications with the overall antenna size. This work presents a...
-
Leakage-aware wide fan-in domino logic architecture using controlled keeper and stacked footer for low-power high-speed CMOS with tag comparator design
Wide fan-in domino logic circuits are widely used in high-speed applications such as tag comparators; however, their performance is degraded by contention, leakage and dynamic node instability in scaled CMOS technologies. A new wide...
-
Design of a compact two-port MIMO antenna with an innovative metamaterial-based decoupling structure for 2.8–5.8 GHz 5G communication
In 5G applications, multiple-port antennas are essential because they improve data rates and ensure the communication system operates efficiently, improve signal quality, low interference, and ensure regulatory compliance. This research...
-
Real-time FPGA-based secure semantic adaptive watermarking system for high-resolution medical images
Medical image watermarking plays a critical role in securing patient data while maintaining diagnostic fidelity, but suffers from Initialization Vectors (IV) reuse vulnerabilities and falsification of critical regions. Hence, the...
-
Design and isolation prediction of a quad-port orthogonal MIMO antenna with defective ground structure for sub-6 GHz applications using machine learning
The rapid growth of 5G Sub-6 GHz applications, including vehicular communication, wireless networks, and 5G-enabled smartphones, has intensified the demand for compact, high-isolation MIMO antenna systems. However, achieving improved...
-
An RIS-empowered double-keyed index-chaos modulation scheme with signal fidelity equalization enhancement in massive MIMO-OFDM systems
Massive Multiple-Input Multiple-Output-Orthogonal Frequency Division Multiplexing (MIMO-OFDM) systems with Reconfigurable Intelligible Surface (RIS) have been historically based on the coherent detection mechanism, where the receiver...
-
A 155 V/ns-CMTI on-chip digital multi-layer coreless transformer-based isolated gate driver using 0.18-$$\mu$$m HV CMOS process
The increasing demand for efficient and reliable power electronic systems in applications such as data centers, motor drivers, solar inverters, and industrial automation has necessitated advancements in gate driver technologies. This...
-
Three new fully-uncoupled voltage mode third-order sinusoidal oscillators with inverting current feedback operational amplifier
This paper presents three new fully-uncoupled voltage-mode third-order sinusoidal oscillators utilizing inverting current feedback operational amplifiers (ICFOAs), along with four passive resistors and three grounded capacitors. The...