MRS Advances
Издатель: Springer Nature · 20 статей
-
Nanoscale etching characteristics for controlled AFM tomography of amorphous chalcogenide thin films
Amorphous chalcogenide materials are of increasing interest for phase-change memory and threshold-switching device applications. However, the fast-switching behavior in the nanoscale regime is difficult to confirm and characterize in...
-
Microstructural characteristics of fifth-century Silla gilded artifacts from Hwangnam-dong Tomb No. 120-2 in Gyeongju, Korea
This study investigated the gilding microstructures and manufacturing techniques of a fifth-century Silla horse-harness fitting excavated from the grave-goods compartment of Hwangnam-dong Tomb No. 120-2 in Gyeongju, Korea. The specimen...
-
Monolithic fabrication of 1S1R cross-point device using single Ge x Te 1-x material by controlling composition between memory and threshold switching
Three-dimensional (3D) integrated one-selector one-resistor (1S1R) cross-point arrays are emerging as a leading next-generation memory technology. Achieving both nonvolatile memory switching and volatile threshold switching within a...
-
Selective facet stabilization of anatase TiO 2 by Sn doping
Anatase titanium dioxide (TiO 2 ) is widely recognized for its superior photocatalytic capabilities due to its indirect band gap, low cost, and high chemical stability compared to other oxide semiconductors. Despite its advantages, TiO...
-
Imaging optimization of FIB cross sections for reliable porosity analysis of PEMFC cathode catalyst layers
Focused ion beam–scanning electron microscopy (FIB–SEM) was used to investigate the effects of acceleration voltage, beam current, and cryogenic conditions on the cross-sectional preparation of proton exchange membrane fuel cell (PEMFC)...
-
Local bandgap and optoelectronic measurement using monochromated STEM-VEELS: fundamentals, challenges, and recent advances
Optoelectronic characterization of local bandgap, dielectric response, and plasmon at the nanometer scale has become increasingly important for understanding and optimizing modern electronic, optoelectronic, and quantum materials....
-
Structural and electrical characterization of Hf 0.5 Zr 0.5 O 2 thin films crystallized by rapid thermal annealing
The effects of rapid thermal annealing (RTA) temperature on the structural and electrical properties of 10 nm-thick Hf 0.5 Zr 0.5 O 2 (HZO) thin films were investigated. Structural analyses revealed that the films remained largely...
-
Mixed-phase structural characterization of urchin-like CuO/Cu₂O nanostructures
In this study, urchin-like CuO/Cu₂O mixed-phase nanostructures were synthesized via a simple surfactant-assisted approach, where the surfactant regulated the nucleation and anisotropic growth, leading to a hierarchical morphology with...
-
Orientation microscopy study of cryogenic-temperature friction stir processed AA6xxx sheet: microstructure and second phase particles evolution
Cryogenic-temperature friction stir processing (CT-FSP) was performed on AA6xxx sheets at 600 RPM and 500 mm/min using in-process liquid N 2 cooling to investigate microstructure, precipitate evolution, and the resulting mechanical...
-
A critical review of chemical heterogeneity–driven microstructure control in steels
This paper reviews a recent microstructure control strategy for steels based on intentional chemical heterogeneity, referred to as “chemically heterogeneous steels” or “chemically patterned steels.” This approach introduces controlled...
-
Umbelliferone-induced recovery of postsynaptic density structure revealed by the reanalysis of public electron microscopy data
Public biological data repositories not only ensure research reproducibility and transparency but also enable new scientific discoveries that extend beyond the scope of original studies. A previously published study on umbelliferone...
-
FPGA-based reconfigurable scanning and data acquisition system for scanning electron microscopy
We present an FPGA-based reconfigurable scanning and data acquisition system for scanning electron microscopy (SEM). Built on the Xilinx Artix-7 (XC7A35T), the system integrates dual-channel 14-bit DAC raster scan waveform generation,...
-
A holder-type plasma cleaner for in-situ removal of hydrocarbon contamination in the transmission electron microscope chamber
Hydrocarbon contamination is a common problem in transmission electron microscopy (TEM), affecting image contrast and the accuracy of quantitative spectroscopic analysis. Although plasma cleaning of specimen holders and samples is...
-
Histology and morphometry of the skin of the Korean ice goby Leucopsarion petersii (Gobiiformes, Gobiidae), in relation to its ecology and habitat
The histological structure and morphometric characteristics of the skin of the Korean ice goby Leucopsarion petersii were investigated using light microscopy, two histological staining techniques, and SPSS statistical analysis. Skin...
-
Improved conductive carbon nanotube tape using natural cellulose fibrils for array tomography
Array tomography using scanning electron microscopy (SEM) enables large-volume, nanometer-scale reconstruction of neural circuits and allows nanometer resolution of synaptic vesicles and other ultrastructural features. For stable serial...
-
In-situ TEM observation of stacking-fault intersection–controlled partial dislocation dynamics in high-Mn austenitic steel
The deformation behavior of a high-Mn austenitic steel was investigated using in-situ straining transmission electron microscopy (TEM), with emphasis on the dynamic interaction between stacking faults and partial dislocations during...
-
Mitigation of artifacts in imaging biosamples with optical scanning transmission electron microscopy
Electron microscopy (EM) allows ultrastructural analysis of biological tissues and cells, but images frequently contain artifacts because biological samples have to undergo rigorous preparation to be resistant to vacuum conditions and...
-
Cryo-FIB–enabled 3D imaging of biological specimens
Cryo-electron tomography (cryo-ET) has become a key technique for observing the three-dimensional structures of biomolecular complexes and organelles in cellular and tissue environments in situ. However, for thicker specimens that...
-
Cationic lipid-based nanoparticles for therapeutic delivery in cancer treatment: physicochemical characteristics, therapeutic cargos, and clinical potential
Over the past few decades, numerous biological therapeutics, such as RNAs and polypeptides, have emerged as promising alternatives to traditional chemotherapy. While their molecular mechanisms of action are well-understood, their...
-
Atomic structure of β″ precipitates in high-Si containing Al–Si–Mg alloy
The strength of precipitation-hardened Al–Si–Mg alloys primarily derives from the nanoscale coherent β″ precipitates, which are the dominant contributors to strengthening under peak-aged conditions. Observing these nanoscale...