Thermokinetic Analysis and Energy Performance Evaluation of a Hybrid Forced Convection Solar Dryer Applied to Ziziphus Lotus Leaves
Аннотация
Abstract This study investigates the convective solar drying behavior of Ziziphus lotus leaves using an forced-convection hybrid solar dryer equipped with active temperature regulation and electrical auxiliary heating, which integrates forced convection and electrical backup to ensure controlled thermal conditions. Experiments were conducted at varying drying temperatures (40–70°C) and a constant air velocity of 1.55 m/s to evaluate drying kinetics, energy consumption, and efficiency. A characteristic drying curve (CDC) was successfully developed using Van Meel’s method and fitted with a second-degree polynomial model ( R 2 = 0.9567), demonstrating its robustness for predictive modeling. Energy performance metrics, including specific energy consumption (SEC), thermal energy utilization ratio (TEUR), and energy/thermal efficiencies, were systematically analyzed. Results indicated a 28% reduction in Specific Energy Consumption (SEC) when operating at 70°C compared to 40°C, a benefit directly enabled by the solar integration. The Thermal Energy Utilization Ratio (TEUR), which quantifies the solar contribution, reached a maximum of 95% at 70°C, demonstrating that the solar collector supplied 95% of the total thermal energy required for drying at this temperature, with the electrical backup providing only the remaining 5%. This high level of solar fraction highlights the strong potential of this hybrid approach for decarbonized drying. The process achieved peak thermal and energy efficiencies of 10 and 9.5%, respectively, at the highest temperature.