Effects of acidic environment and freeze–thaw cycles on slaking and fragmentation characteristics of Jurassic mudstone

Journal of Marine Science and Application · Springer Nature · 2026-11-19 · DOI: 10.1007/s40948-026-01277-6

Abstract

Abstract Jurassic mudstone widely distributed across sedimentary basins undergoes significant deterioration under the combined influence of acidic corrosion and cyclic freeze–thaw processes. Nevertheless, the interactive mechanism governing the slaking and fragmentation of mudstone under the action of the two environmental stressors remains insufficiently investigated. Ellipsoidal Jurassic mudstone specimens in this study were immersed in solutions with pH values of 3, 5, and 7, and subjected to 0, 10, 20, and 30 freeze–thaw cycles. Subsequent standardized tests and analyses were carried out, including slake durability testing, microstructural characterization, and fragment analysis. The cumulative mass loss rate increases nonlinearly with the increase of cycle number and acidity, where the average mass-loss increment reaches 0.35% per 10 cycles at pH 3 between 10 and 20 cycles, compared with only 0.11% per 10 cycles at pH 7, and the increment accelerates to 0.44% per 10 cycles beyond 20 cycles under acidic conditions. The fragmentation process produces five morphological categories of fragments and the fragment roundness factor increases from approximately 0.73 of FT 0 pH = 7 to 0.89 of FT 30 pH = 3, while the mean fragment size decreases under the most severe combined condition. The generalized extreme value modeling further reveals that the location parameter decreases systematically and the scale parameter increases with the increase of acidity and freeze–thaw frequency, confirming that fragmentation progressively becomes finer and more heterogeneous. Microstructural evidence indicates that acidic dissolution of calcareous cement and clay minerals enlarges the pore network and enhances water uptake, thereby amplifying frost-heave stresses during freezing. Hierarchical variance decomposition further identifies the number of freeze–thaw cycles as the dominant individual contributor to most degradation descriptors, whereas the coupled interaction governs 38.0% of the variance of the Rosin–Rammler uniformity index. Article Highlights (1) Acidic corrosion and freeze-thaw cycling together degrade mudstone more than either process acting alone. (2) Acidic dissolution of calcareous cement enlarges the pore network and amplifies frost-heave stresses. (3) Fragments become finer and more rounded, shifting from angular to sub-spherical shapes.

Read at publisher →

Similar articles