Abstract The computer modeling for the energy parameters of the PV panel with partial shading and overheating are conducted in the study. The non-linear steady-state 2D mathematical model, corresponding numerical algorithm and in-house software were developed for the modeling. A temperature plateau with increased values was detected in the fully illuminated PV panel. An area of the temperature plateau does not depend on a wind speed that simplifies design of the temperature stabilization systems. The impacts of partial shading and overheating on the PV panel electrical performance were compared. It was determined that at wind speed of 2 m/s and ambient temperature of 10°C, the decrease in electrical power due to partial shading is 1.5 times greater than by overheating. The obtained results are important for selecting the temperature stabilization systems of the PV panels, as well as for optimizing their energy load. The developed in-house Fortran software can be used as an independent software application or as part of a digital twin to estimate the PV panel energy performance.
Numerical Modeling of Energy Parameters for Photovoltaic Panels under Shading Conditions and Localized Overheating. // ENGINEERING Mechanical Engineering. – 2026. – DOI: 10.3103/S0003701X26600591. – URL: https://link.springer.com/article/10.3103/S0003701X26600591
(2026). Numerical Modeling of Energy Parameters for Photovoltaic Panels under Shading Conditions and Localized Overheating. ENGINEERING Mechanical Engineering. https://doi.org/10.3103/S0003701X26600591
“Numerical Modeling of Energy Parameters for Photovoltaic Panels under Shading Conditions and Localized Overheating.” ENGINEERING Mechanical Engineering, 2026. doi:10.3103/S0003701X26600591.
@article{article35351,
title = {Numerical Modeling of Energy Parameters for Photovoltaic Panels under Shading Conditions and Localized Overheating},
journal = {ENGINEERING Mechanical Engineering},
year = {2026},
doi = {10.3103/S0003701X26600591},
url = {https://link.springer.com/article/10.3103/S0003701X26600591}
}
Abstract Jurassic mudstone widely distributed across sedimentary basins undergoes significant deterioration under the combined influence of acidic corrosion and cyclic freeze–thaw processes. Nevertheless, the interactive mechanism...
Tight reservoirs are typically exploited using a combination technology of long horizontal wells and large-scale hydraulic fracturing. After fracturing fluid enters the formation, it induces various types of micro-fractures. However,...
Residual coal pillars can induce pronounced and spatially heterogeneous stress redistribution in neighboring coal seams, thereby increasing the instability risk of nearby roadways. The conventional principal stress difference Δ σ...
Accurate in situ stress characterisation supports underground excavation assessment, but data-driven estimates can be biased by target-derived information and spatially unrepresentative validation. We evaluated a physics-consistent...
Research on rock masses containing weak interlayers has focused on single layers, whereas multilayer configurations in natural formations remain less studied. To investigate the combined structure influence of weak interlayer quantity...