Assessing the Influence of Microstructure Parameters on the Wear Resistance of Elastomer Composites

Science China Physics, Mechanics & Astronomy · Springer Nature · 2026-04-01 · DOI: 10.3103/S1068366626700376

Аннотация

Abstract To evaluate the influence of the microstructural parameters of elastomeric composites on the wear resistance of this class of materials, elastomeric composite samples with varying degrees of filling and carbon black particles of varying dispersion were fabricated and studied. The samples were prepared using several filler particle concentration points, while maintaining a constant elastomer matrix volume between particles of varying dispersion (theta parameter) in accordance with the Shklovskii–de Gennes model. During the study, elastomeric composite samples based on DSSK-628 rubber with carbon black particles of varying dispersion (grades P-324 and T-900) were fabricated. The dispersion quality of the filler particles was assessed for elastomeric composite samples filled with carbon black particles of varying dispersion and concentration. During the experiments, the wear resistance parameters of the elastomeric composites were assessed depending on the concentration and dispersion quality of the filler particles. Distribution functions for filler particle agglomerates and the distances between them, determined from AFM images processed in SPIP software, were obtained for all studied elastomeric composite samples. The asymmetry and excess coefficients were used to describe the distribution functions. This method was found to enable quantitative assessment of the dispersion quality and the degree of agglomeration of carbon black particles with varying degrees of dispersion and filling in elastomeric composites. The dispersion quality of filler particles in a series of elastomeric composite samples was found to be related to the dispersed filler content in these samples, as well as to the value of generalized parameter Θ, and varied along a curve with a maximum. The wear resistance of the samples (abrasion resistance according to GOST 23 509–79) was found to be related to the concentration of highly dispersed filler particles, as well as to the quality of their dispersion in the elastomeric matrix. For example, the maximum wear resistance values were obtained for sample 24 with Θ = 0.45, As = 0.92, Ek = 0.03, and an abrasion resistance index of 81. It was shown that the abrasion resistance of these samples varies along a curve with a maximum, similar to the dispersion quality of the filler particles within the elastomer matrix.

Читать у издателя →

Похожие статьи