How Does the Viscosifying Ability of Xanthan Gum and HPAM Polymers Differ in Low- and High-Salinity Conditions?
Аннотация
HPAM and xanthan gum are the two common EOR polymers that generate viscosity through different mechanisms. The viscosity-generating capacity of these polymer solutions is affected by several factors, including polymer concentration and brine salinity. In recent times, the usage of low-salinity brine for applications has garnered increased attention. Although studies were undertaken to compare the process efficiency of HPAM and xanthan gum polymers, there is no clarity on “how the viscosifying ability of these polymer solutions differs at differing salinity.” We explore how the polymer’s concentration (from 100 to 4000 ppm) affects the viscosity of these common polymers at two salinity levels: 4907 ppm and 24,535 ppm brine. Steady shear rheological tests are performed at room temperature. Results indicate that, compared to xanthan gum solutions, HPAM solutions exhibit higher viscosity across all concentrations at low salinity, due to sustained chain repulsion and chain stretch effects. However, at higher salinity, HPAM chains tend to coil, leading to lower viscosity than the more rigid xanthan gum, but after a concentration of 2000 ppm. For concentrations lower than 2000 ppm, HPAM still exhibits higher viscosity than xanthan gum. The study indicates the novel findings that the HPAM’s chain repulsion effect at higher salinity levels diminishes significantly only beyond a certain concentration, when compared to xanthan gum’s viscosity enhancement through swelling. From an application standpoint, these findings highlight that when choosing polymers, one must consider not only salinity, concentration, and polymer type but also the specific concentration range in which they are studied.