GIS-Based Techno-Economic Screening of Off-Grid Renewable Hydrogen Micro-refueling Hubs Using a Hydrogen Demand Coverage Threshold
Аннотация
This study develops a GIS-based techno-economic screening framework for off-grid renewable hydrogen micro-refueling hubs in Saudi Arabia under a standardized vehicle refueling demand profile. Six renewable-energy configurations are evaluated across 25 locations using the same hydrogen demand profile to isolate the effects of resource availability, system architecture, storage requirements, and economic assumptions. The optimized systems are assessed using techno-economic, environmental, and reliability indicators together with a hydrogen demand coverage ratio (HDCR) based on an annual demand of 520 kg H 2 /year. The results identify the WT/BS/BG configuration at AlLith as the most favorable tank-inclusive solution, achieving an LCOE of 0.144 $/kWh and an LCOH of 5.66 $/kg while avoiding 33.3 tons of CO 2 annually. Approximately 11% of generated electricity is available as surplus for electrolysis, while hydrogen storage dominates life-cycle cost, contributing 79.6% of total NPC in the representative integrated system. Surplus-driven hydrogen production reaches about 953 kg/year for the optimized PV/BS configuration in Sharurah and exceeds 3900 kg/year for the broader WT/BS spatial assessment in Dammam; the economically selected WT/BS configuration occurs in Jeddah with 1133.2 kg/year. Four of the six selected optimal configurations satisfy the standardized annual hydrogen demand. Sensitivity analysis shows that LCOH is most responsive to hydrogen demand (−25.5% to +22.3% for ±20% variation) and CAPEX (approximately ±24.7%). The results demonstrate that low LCOE or LCOH alone is insufficient for selecting a renewable hydrogen micro-refueling hub; annual hydrogen production, demand coverage, storage cost, and supply reliability must also be considered.