Purified Silica Extracted from Natural Sand via Chemical Processing Followed by Thermal Treatment for Photovoltaic Applications: A First Report on the Noufoudh Region (Saudi Arabia)
Аннотация
The development of efficient purification strategies for silica obtained from natural sand is an important step toward producing suitable silica precursor materials for photovoltaic-related applications. In this work, we investigate the purification of natural sand from the Noufoudh region (Saudi Arabia) using a combined chemical treatment consisting of acid leaching (HNO 3 ), alkaline fusion (NaOH), and chemical precipitation with HCl, followed by thermal annealing at 900 °C under a nitrogen atmosphere. The structural, morphological, and chemical bonding characteristics of the raw and treated samples were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). XRD analysis revealed that the raw sand mainly consists of quartz with a broad background contribution, whereas the purified sample after thermal treatment exhibited sharper quartz diffraction peaks and improved crystallinity. The refined diffraction parameters indicated a high degree of structural ordering, with an estimated crystallite size of approximately 50 nm. SEM observations showed a morphological transformation from irregular coarse grains with rough surfaces to more homogeneous and finer particles after the purification process. FTIR analysis confirmed the progressive modification of hydroxyl-related bands during thermal treatment and the predominance of the Si–O–Si network vibration around 1100 cm⁻1 after annealing. The obtained results demonstrate that the combination of chemical purification and thermal treatment is an effective approach for improving the structural and morphological characteristics of silica extracted from local Saudi sand resources. Although the present study confirms the formation of purified crystalline silica based on structural and spectroscopic analyses, further quantitative elemental investigations are required to determine residual impurity concentrations and fully assess its suitability as a precursor material for photovoltaic applications. This work highlights the potential of Noufoudh sand as a promising local resource for advanced silica-based materials in alignment with Saudi Vision 2030 objectives for local material development.