Removal of Vanadium and Nickel Ions from Iraqi Heavy Crude Oil Using a Novel Composite Kerosene–Zirconia Nanoparticles–Surfactant
Аннотация
The increasing reliance on heavy crude oil has heightened the need to reduce its metal content, particularly vanadium and nickel, which adversely affect refinery catalysts and operational efficiency. This study evaluates a kerosene–zirconia (ZrO₂) nanoparticle–SDBS system for treating Iraqi heavy crude oil from the East Baghdad field under ultrasonic conditions. The effects of treatment temperature (20, 40, 60, and 75 °C) and ultrasonic exposure time (15, 30, 45, and 60 min) were investigated. For each experiment, 20 mL of kerosene containing 2000 ppm ZrO₂ and SDBS at 10 wt% of the ZrO₂ mass was used with 80 mL of crude oil. After ultrasonic treatment, the samples were left undisturbed for 48 h for gravity-assisted phase separation; the separated kerosene-rich phase was removed, and the recovered oil fraction was centrifuged at 6500× g for 20 min before analysis. Under the optimum investigated condition (75 °C, 60 min), vanadium concentration decreased from 109.67 to 15 ppm and nickel concentration from 42.65 to 16 ppm. These changes correspond to concentration decreases of 86.3% for V and 62.5% for Ni. When the recovered treated-oil quantity was considered, the corresponding mass-based reductions in the recovered oil fraction were approximately 87.6% and 66.1%, respectively. Approximately 76 mL of treated oil was recovered from the initial 80 mL crude oil sample, corresponding to a volumetric oil recovery of about 95%. The results demonstrate substantial reduction of V and Ni in the recovered treated-oil fraction; however, adsorption, phase redistribution, and precipitation are treated as possible contributing pathways rather than independently verified mechanisms.