Relationship between Thermophysical and Tribological Characteristics of Asbestos-Free and Copper-Free Friction Composite and Its Comparison with Copper-Containing Counterparts
Аннотация
Abstract Comparative studies of the thermophysical and tribological characteristics of a newly developed copper-free NAO composite (RFM) utilizing basalt fiber from Armenian deposits and three commercial copper-containing materials were carried out. The tests were conducted on an FM-9 friction machine in accordance with GOST R ISO 7881–94 and on an inertia test bench. The RFM composite was found to exhibit the highest deceleration (6.33 m/s 2 ), a stable friction coefficient (Δ f = 0.04), and low wear (2.4% in linear dimension). In these parameters, the copper-free NAO composite RFM is comparable to the best copper-containing commercial counterpart. Principal component analysis revealed correlations between the thermophysical and tribological characteristics of the composites studied. Thermal conductivity was found to correlate positively with deceleration ( r = 0.55) and friction coefficient ( r = 0.69), contributing to their increase, and negatively with wear ( r = –0.40), reducing its intensity. The strong negative correlation between thermal conductivity and the friction coefficient range ( r ≈ –0.90) indicates that efficient heat dissipation from the contact zone suppresses friction fluctuations, ensuring more stable material performance. Heat capacity exhibits moderate correlations with deceleration ( r = 0.56) and friction coefficient ( r = 0.46) and governs the heating depth ( r = –0.88), while its influence on friction instability and wear is negligible. The results can be used to optimize the composition of copper-free NAO composites. The developed friction material RFM is recommended for brake systems under medium and heavy-duty operating conditions.