Predefined-Time Super-Twisting Sliding Mode ADRC for High-Performance Heave Compensation in Marine Winches
Аннотация
The active heave compensation (AHC) system was crucial for maintaining the spatial stability of underwater payloads in deep-sea operations. However, under dynamic sea conditions, AHC frequently suffered from uncontrolled convergence times and poor response performance. To address these issues, this study adopted a switched reluctance motor (SRM) as the driving unit and designed a high-performance Predefined-Time Super-Twisting Sliding Mode Active Disturbance Rejection Control (PTSMC-ADRC) speed control strategy to meet heave compensation requirements. By combining a predefined-time Lyapunov framework and a super-twisting sliding mode speed controller, the convergence time was inserted as an explicit parameter into the control law and gave a preset upper bound, which is independent of the initial conditions. This predefined-time framework is subsequently embedded into an ADRC control to formulate the outer speed loop, where an Extended State Observer (ESO) is designed to provide real-time feedforward compensation for lumped disturbances. The output of the speed controller is directly coupled with the inner loop of direct torque control (DTC), thereby optimizing the speed tracking problem of the system. Simulated results showed that PTSMC-ADRC accelerated the dynamic response by 77.3% compared to conventional ADRC and maintained torque ripple within 3%. Under severe sea states, the system achieved a compensation accuracy exceeding 95%, providing a robust and theoretically grounded solution for modern marine engineering.