Energy and Exergy Analyses of Passive & PVT-CPC Integrated Active Solar Stills under Natural and Forced Modes of Circulation: A detailed Comparative Study
Аннотация
Abstract The development of effective and sustainable desalination technology is imperative due to the increasing need for freshwater in arid and semi-arid countries. Low productivity and poor energy utilization often constrain the performance of solar stills, despite their simplicity and low cost. In the Present study, an analytical simulation has been conducted to evaluate and compare the performance of a conventional passive solar still with two PVT–CPC (Photovoltaic Thermal–Compound Parabolic Concentrator) integrated active solar stills operating under the natural and forced circulation modes. The governing energy balance equations for the system components were formulated and numerically solved in MATLAB software using representative summer climatic data of New Delhi, India. The model predicted transient temperatures of the glass cover, basin water, absorber plate, PV module, and working fluid. These thermal states were subsequently used to determine the hourly distillate yield, instantaneous efficiency, daily thermal efficiency, and exergetic efficiency. Results showed that the passive still produced 3.16 kg/m 2 day, whereas natural and forced circulation modes yielded 4.178 and 7.668 kg/m 2 day, respectively. The overall thermal efficiency of the system enhanced from 5.03% in the passive mode to 20.25% under the natural mode of circulation whereas 25.14% enhancement with forced mode of circulation. From exergy analysis, it is inferred that the forced mode of circulation produced the best performance in terms of overall daily exergetic efficiency of 6.47% compared with natural mode of circulation (5.95%) and passive solar still (0.75%), highlighting reduction of irreversibilities in the evaporation–condensation cycle and electrical energy gain. In addition to improved freshwater productivity, the PVT–CPC integration provided supplementary electrical energy, enabling circulation or auxiliary applications and enhancing system versatility.