Natural fiber-cement hybrid composites with lime-treated rice husk and zeolite
Аннотация
Natural fiber–cement composites (NF–CCs) have gained increasing interest due to their low density, biodegradability, fire resistance, and dimensional stability; however, their broader application is limited by weak mechanical performance arising from poor fiber–cement interfacial compatibility. This study investigates the influence of lime (CaO) chemical treatment of rice husk particles and the incorporation of natural zeolite on the physico-chemical, mechanical, and morphological properties of NF–CCs. Rice husk particles were treated using lime solutions at three concentrations (0%, 3%, and 5% w/v), and zeolite was added at three dosages (0 wt%, 5 wt%, and 10 wt%) relative to cement. Comprehensive analyses were conducted on treated rice husk particles, fresh mortars, and hardened composites. Chemical treatment increased the crystallinity index of rice husk and resulted in the deposition of a thin lime layer on the particle surfaces, as confirmed by scanning electron microscope (SEM) and Fourier transform infrared (FTIR) spectroscopy. Rheological assessments showed that zeolite addition increased viscosity and shear resistance, whereas lime treatment decreased these properties due to reduced water absorption of treated fibers. The addition of zeolite up to 5% had no significant effect on the Modulus of Elasticity (MOE) of NF–CCs; however, increasing the content to 10% led to a notable increase in MOE. Furthermore, the addition of zeolite did not significantly affect other mechanical properties, such as the Modulus of Rupture (MOR), compressive strength, and E, while lime treatment led to substantial improvements in all mechanical indices. Thermogravimetric analysis further demonstrated improved thermal stability in composites produced with chemically treated rice husk. Overall, lime pretreatment effectively enhanced fiber–cement compatibility and improved the performance of NF–CCs.