Compatibility of polyvinyl acetate with functionalized cellulose nanofibrils for rheological modification and film formation

Journal of Polymer Research · Springer Nature · 2026-11-19 · DOI: 10.1007/s10570-026-07310-x

Abstract

In this work, four types of cellulose nanofibrils (CNFs)—enzymatically pretreated (CNF e ), TEMPO-oxidized (CNF t ), sulfated (CNF s ), and phosphorylated (CNF p )—were prepared and incorporated in poly(vinyl acetate) (PVAc) dispersions to evaluate how CNF surface chemistry affects colloidal stability, rheological behavior, film formation, and the mechanical and surface properties of cast films. The different modification routes produced CNFs with distinct morphologies, surface charge densities, and substitution degrees, which influenced their interaction with the PVAc matrix. Rheological analysis showed shear-dependent behavior in all systems, with marked differences in absolute viscosity and post-shear recovery depending on CNF chemistry and loading. At low CNF content, the PVAc–CNF formulations remained within a low- to moderate-viscosity range, suggesting potential suitability for model waterborne coating processes such as spray coating, dip coating, flow coating, or thin-layer casting. Among the evaluated systems, phosphorylated CNFs provided the most balanced response, combining relatively low viscosity, high structural recovery, improved visual homogeneity, a comparatively compact cross-sectional morphology by FE-SEM, and enhanced tensile strength at 5% loading compared with neat PVAc. TEMPO-oxidized CNFs showed favorable behavior mainly at low loading, whereas sulfated CNFs, particularly at high loading, showed poorer compatibility, lower recovery, microstructural discontinuities, and reduced mechanical performance. FTIR analysis confirmed the successful chemical modification of the CNFs and indicated that the interactions in the PVAc–CNF films were mainly associated with physical intermolecular associations rather than the formation of new covalent bonds. Overall, these results show that tuning CNF surface chemistry is an effective strategy to modulate the rheology, microstructure, and film performance of waterborne PVAc–CNF systems, providing guidelines for thin protective coatings, adhesive interlayers, and paper or cardboard surface treatments where controlled viscosity and post-shear recovery are required.

Read at publisher →

Similar articles