Characterization of lignocellulosic nanofibers (LCNFs) and LCNF films from sugarcane bagasse: effect of pulping processes and post-treatments

Journal of Polymer Research · Springer Nature · 2026-11-19 · DOI: 10.1007/s10570-026-07319-2

Аннотация

This study investigates how pulping processes and subsequent treatments influence the fabrication of lignocellulosic nanofibers (LCNFs) and their corresponding films derived from sugarcane bagasse. Different LCNFs were obtained by microfluidization of fibers manufactured by different pulping processes, including soda pulp (which was obtained from the factory), monoethanolamine (MEA), and formacell, using different post-treatments, including cold caustic extraction (CCE) performed under mild thermal post-treatment, and DEpD bleaching, an elemental chlorine free (ECF) sequence. Pulping (except for soda pulp) and CCE post-treatment processes were conducted under optimized conditions to balance delignification efficiency, pulp yield, and process mildness. CCE was carried out at 20 °C for 60 min using 10% NaOH, while DEpD bleaching followed standard ECF protocols. LCNFs were used to prepare LCNF films by the solution-casting method. The results showed that according to the type of pulp used, the applied post-treatment, and the chemical composition of the pulp, LCNFs exhibited distinct morphologies and average diameters (17.34–42.78 nm), crystallinity indices (between 58.33 and 71.63%), onset temperatures of thermal degradation (T onset ) ranging from 274.9 to 288.0 °C, and maximum degradation temperatures (T max ) ranging from 331.7 to 349.6 °C. LCNF films also exhibited tensile strengths ranging from 17.96 to 44.28 MPa, and different lightness and colorimetric characteristics. The results show that desired properties and applications of LCNFs and LCNF films can be tailored by choosing the kind of pulp, post-treatment, and subsequently the pulp’s chemical composition. This study suggests that, under the laboratory-scale conditions investigated, CCE treatment produced LCNFs and LCNF films with properties comparable to those obtained by bleaching.

Читать у издателя →

Похожие статьи