Experimental Study on Nonlinear Flow Behavior and Erosion Characteristics in Filled Fractures
Аннотация
Seepage-induced internal erosion in filled fractures is a key trigger of water-inrush hazards in deep geo-engineering. However, the coupled effects of fill gradation, fracture roughness, and aperture on erosion evolution and nonlinear flow behavior remain insufficiently understood. In this study, visualized horizontal seepage–erosion experiments were performed using 3D-printed transparent rough fractures to systematically examine the combined influences of fill gradation, fracture-wall roughness, and initial aperture. The results show that larger initial apertures and smoother fracture walls promote fine-particle loss and intensify nonlinear flow behavior. Particle gradation also plays a critical role in controlling erosion susceptibility and hydraulic response. In general, gap-graded fills are more susceptible to channelized erosion and exhibit stronger non-Darcy flow because the absence of intermediate particles weakens their internal stability. However, under small-aperture and high-roughness confinement, coarse particles in gap-graded fills may form bridging or clogging structures at local constrictions, temporarily suppressing fine-particle discharge and visible channel widening. By contrast, continuously graded fills may exhibit a higher progressive fine-particle erosion ratio under small-aperture and low-gradient conditions, although their erosion process is not dominated by strongly channelized failure. Furthermore, high-gradient hydraulic scouring can induce dynamic channelization, making conventional porous-media models based on static pore-structure parameters inadequate for describing the rapid increase in discharge during erosion. To overcome this limitation, a generalized modified non-Darcy seepage model is proposed based on the Forchheimer framework and a homogenization approach. Erosion-dependent correction factors associated with the fine-particle loss ratio are introduced, and dynamic correction relationships are established for both the linear and nonlinear resistance terms. The proposed model reasonably captures the erosion-induced nonlinear hydraulic evolution of filled fractures and agrees well with the experimental measurements.