Nonlinear Probabilistic FE Analysis of RC-URM Infilled Frames Under Differential Settlement Induced by 3D Soil Heterogeneity
Аннотация
Differential settlement resulting from the spatial variability of soil properties can significantly affect the structural performance of reinforced concrete (RC) frames with unreinforced masonry (URM) infill walls, owing to the low tensile strength and brittle behavior of masonry. Despite its practical relevance, the nonlinear and probabilistic response of RC–URM infilled frames founded on three-dimensional (3D) heterogeneous soil remains insufficiently investigated. Unlike previous studies that addressed either probabilistic soil settlement or nonlinear structural behavior separately, this study couples 3D soil spatial variability with advanced nonlinear structural and interface modeling within a unified probabilistic framework. A nonlinear probabilistic finite element analysis is conducted on twin RC frame structures with URM infills subjected to differential foundation settlement induced by 3D heterogeneous soil. RC members and URM infill walls are modeled using a continuum concrete damage plasticity (CDP) formulation via a macro-modeling approach, while a cohesive interface model simulates the frame–infill interaction. Soil spatial variability is captured through a 3D random field of elastic modulus, and Monte Carlo simulations quantify the probabilistic structural responses. Each component of the framework, including the 3D random field generator, the foundation settlement response, and the structural CDP formulation, is validated independently against literature data, confirming its capability to capture key settlement-induced damage mechanisms. Results demonstrate that structures on homogeneous soil remain predominantly within the linear elastic range. Conversely, increasing soil heterogeneity induces pronounced nonlinear behavior, including URM infill cracking, RC member damage, and steel reinforcement yielding, effects not captured by deterministic analyses. These findings highlight the critical importance of accounting for 3D soil spatial variability and probabilistic effects in assessing the performance of RC–URM infilled structures.