A Predictive Modelling Analysis for Structural Optimization of Solar Cells toward High-Efficiency Photovoltaic Deployment in Dental Healthcare Facilities
Аннотация
Abstract Access to reliable energy remains a significant challenge for delivering consistent healthcare services in rural and underserved regions of developing countries. Dental healthcare facilities, in particular, depend on a stable and uninterrupted power supply for essential operations such as lighting, sterilization and clinical equipment. Although photovoltaic (PV) systems offer a clean and sustainable energy solution, many solar-powered healthcare installations fail to achieve optimal performance due to poor system design, mismatched load profiles and inefficiencies in energy conversion. This study proposes an optimized PV-based energy system for dental healthcare applications by focusing on device-level improvements in monocrystalline silicon (mono-Si) solar cells. The optimization is achieved through controlled variation of silicon absorber thickness and doping concentration. A simulation-based approach was employed to evaluate key cell and panel-level performance parameters, including conversion efficiency, fill factor, open-circuit voltage, short-circuit current and overall energy output. System performance was modelled using logarithmic regression, with model accuracy validated through R 2 and Mean Absolute Percentage Error (MAPE) analysis. The results indicate that an optimal trade-off between energy output and cost-effectiveness is achieved at a silicon thickness of (0.6–0.8 µm) and a doping concentration of 10 19 cm –3 . The MAPE values remain below 5%, confirming the robustness and reliability of the proposed empirical models. Under these optimized conditions, the PV system demonstrates increased module capacity, higher energy yield and a reduced number of required panels. This enables a more compact and cost-effective PV system design. Overall, this work bridges the gap between semiconductor-level solar cell optimization and system-level energy performance. The proposed data-driven approach provides a scalable solution for improving the sustainability and reliability of PV-powered dental healthcare facilities, particularly in energy-constrained environments. Hence, this work is expected to offer practical insights for tailored PV system implementation in healthcare applications.