Solar energy-based latent heat storage system using paraffin wax with optimized aluminum wire spiral structure
Аннотация
The present work deals with enhancing the thermal conductivity of organic phase change material (PCM), such as Paraffin wax, using an Al-spiral wire foam structure and storing solar energy for medium-temperature applications. In this regard, PCM (especially paraffin wax) can play a major role in storing solar energy and waste industrial heat in the form of latent heat using non-hazardous chemicals. Paraffin wax has poor thermal conductivity; thereby, heat transfer to the PCM is very sluggish. In this regard, LHTES were fabricated using a spiral foam structure made with aluminum wire. Spirals of different (4 mm, 5 mm & 6 mm) internal diameters were used. It has been observed that the Al spiral structure remarkably improved the thermal conductivity and thus reduced the heating time by half in comparison to pure PCM, and the storage efficiency also improved. It was found that PCM with a 5 mm Al spiral structure showed the best performance in terms of overall thermal efficiency, around 79% using a small acrylic tank. A large steel tank for solar energy storage applications with a 5 mm Al structure showed a thermal efficiency of around 55% electrically heated by a 325 W solar PV panel during the sunny periods. During the temperature stability experiment, results revealed that temperature can be maintained above 30 °C for 16–20 h in a small volume, i.e. room environment can be made warm and maintained for a longer sufficient time in the winter season. A part of this system is very useful for low-temperature applications and effective in surviving life in cold areas by using designed LHTES through solar heating.