A Micro-LED PWM pixel circuit achieving stable ultra-low-gray expression through drain-reservoir feedback

Transactions of the Indian Institute of Metals · Springer Nature · 2026-10-08 · DOI: 10.1007/s44469-026-00024-7

Аннотация

This paper proposes a low-temperature poly-Si oxide (LTPO) feedback-assisted pulse-width-modulation (PWM) pixel circuit with a drain-reservoir scheme for ultra-low-gray expression in micro-light-emitting-diode (micro-LED) displays. Accurate low-gray expression is challenging because it is limited by both a long switching delay and a narrow gray-scale margin. The switching delay can be shortened by positive feedback, but the feedback reduces the delay only after it is activated, so a residual delay remains beforehand and appears in the LED current waveform. The proposed drain-reservoir scheme decouples the PWM drain node from the constant-current-generation (CCG) gate node, forming a voltage margin that keeps the LED peak current stable throughout residual delay. As a result, the 14T4C circuit achieves a sub-microsecond falling time of 0.3 µs and expresses gray levels down to 6 G under a γ = 2.2 8-bit condition. The driving TFTs used for CCG current generation, PWM timing control, and feedback are compensated, maintaining an error rate below 5% down to 6 G under ±0.5 V threshold-voltage variations. In addition, the low- and high-gray operating behaviors are separately modeled to verify stable error-rate characteristics in the ultra-low-gray region where the data-voltage margin becomes extremely small.

Читать у издателя →

Похожие статьи