This work presents an on-glass amorphous indium-gallium-zinc oxide thin-film transistor (a-IGZO TFT) operational amplifier to achieve an integrated local voltage-regulation for reference-voltage stabilization in display driving systems. The fabricated op-amp adopts compact n-type-only two-stage architecture to reduce circuit complexity and internal high-impedance nodes for closed-loop operation. Under ± 15 V supply voltages, the measured op-amp exhibits a voltage gain of 35.5 dB, a cut-off frequency of 5.8 kHz, and a unit-gain frequency of 39 kHz. To examine closed-loop controllability, the op-amp was combined with external pass/load components in a prototype regulation setup. The measured output voltages were 1.82 V, 3.79 V, and 5.55 V for reference voltages of 2 V, 4 V, and 6 V, respectively. Circuit-level simulations were further used to analyze line-ripple suppression and load-transient recovery. The results indicate that a-IGZO TFT op-amps can be useful analog building blocks for low-current local voltage regulation in system-on-glass display platforms.
An on-glass a-IGZO TFT operational amplifier for local voltage regulation in display driving systems. // Transactions of the Indian Institute of Metals. – 2026. – DOI: 10.1007/s44469-026-00029-2. – URL: https://link.springer.com/article/10.1007/s44469-026-00029-2
(2026). An on-glass a-IGZO TFT operational amplifier for local voltage regulation in display driving systems. Transactions of the Indian Institute of Metals. https://doi.org/10.1007/s44469-026-00029-2
“An on-glass a-IGZO TFT operational amplifier for local voltage regulation in display driving systems.” Transactions of the Indian Institute of Metals, 2026. doi:10.1007/s44469-026-00029-2.
@article{article34589,
title = {An on-glass a-IGZO TFT operational amplifier for local voltage regulation in display driving systems},
journal = {Transactions of the Indian Institute of Metals},
year = {2026},
doi = {10.1007/s44469-026-00029-2},
url = {https://link.springer.com/article/10.1007/s44469-026-00029-2}
}
A low-temperature, vacuum-free blade-coating process was developed to fabricate CaAlSiN₃:Eu²⁺ phosphor-in-glass (PiG) films directly on sapphire substrates for thermally stable amber emission. The 600 °C process enables uniform film...
This paper proposes a low-temperature poly-Si oxide (LTPO) feedback-assisted pulse-width-modulation (PWM) pixel circuit with a drain-reservoir scheme for ultra-low-gray expression in micro-light-emitting-diode (micro-LED) displays....
Achieving high color conversion efficiency by optimizing the optical properties of quantum dots (QDs) color conversion layers (CCLs) remains a challenge for next-generation display fabrication. CCLs, which convert blue light into red or...
Mura compensation is essential for maintaining the display quality. However, the large volume of Mura compensation data significantly increases memory cost and system complexity. Previous compression methods offer a certain level of...
Cross-linked quantum dot (QD) films fabricated via plasma-induced ligand polymerization (PILP) are proposed as an effective means of enhancing the air and moisture stability of QD films. The PILP process was performed using Ar plasma in...