Low‐Temperature Solid‐State Sintering of High‐Strength and Electrically Conductive Silicon Carbide With Direct Current Flow and In Situ Graphitization

Meicen Fan, Weiwei Xiao, Hengyi Li, Yao Han, Yanhao Dong, Chang‐An Wang
Rare Metals · Wiley · 2026-11-06 · DOI: 10.1002/rar2.70691

Аннотация

ABSTRACT Silicon carbide (SiC) is an ultra‐hard ceramic material and is intrinsically difficult to sinter. Pressureless solid‐state sintering (PS) typically requires high temperatures exceeding 2200°C and a prolonged heating cycle, whereas liquid‐phase sintering lowers the processing temperature at the expense of high‐temperature mechanical performance. Field‐assisted routes such as spark plasma sintering (SPS) and flash sintering have been explored, yet it is still challenging to produce reliable ceramics with improved flexural strength and fracture toughness. Here we report a field‐assisted solid‐state sintering strategy in which electrical current directly flows through the SiC compacts, enabling densification at 1650°C within 2 h. The applied electric field has two roles: voltage‐driven in situ graphitization of organic binders in granulated SiC powders and large current flowing through the sample to enhance densification. The produced SiC ceramics with in situ graphitized carbon have an exceptional flexural strength of 625 MPa at room temperature and 746 MPa at 1400°C, a high fracture toughness of 5.0 MPa m 1/2 , and a low electrical resistivity of 9.6 Ω cm, which is four orders of magnitude lower than that of conventional SiC ceramics. This work establishes a new field‐assisted sintering route to access strong and electrically conductive forms of SiC ceramics and offers new opportunities for accelerated processing of high‐temperature ceramics.

Читать у издателя →

Похожие статьи