High‐Efficiency Alkali‐Based Metallurgical Valorization of Hematite Concentrate Into High‐Performance LiFePO4 Cathodes

Yuanpeng Cao, Qingbo Jia, Wenhui Tu, Liqi Li, Chenyi Huang, Xinyu Zhang, Runlin Li, Zhongyuan Luo, Jingjing He, Can Wu, Ding Wang, Xianshu Wang, Jianguo Duan
Rare Metals · Wiley · 2026-11-14 · DOI: 10.1002/rar2.70709

Аннотация

ABSTRACT Developing low‐cost and reactive iron sources is important for the sustainable production of LiFePO 4 (LFP) cathodes, yet the direct use of hematite concentrate (HC) is limited by impurity accumulation and insufficient reactivity. Herein, a source‐level impurity‐regulation strategy integrating liquid‐assisted mechanical activation, Na 2 CO 3 ‐assisted sodiation roasting, and leaching is developed to upgrade HC into a reaction‐ready Fe precursor for LFP synthesis. Thermodynamic calculations suggest that Si‐, Al‐, Cr‐, and S‐bearing impurity phases are more prone to sodium‐mediated conversion than the dominant Fe 2 O 3 matrix, favoring their preferential transformation into leachable or volatile species. After optimization, the Fe content increases from 59.67 wt% to 65.58 wt%, while the contents of Al, Cr, Si, and S are markedly reduced. Compared with the LFP cathode synthesized from untreated hematite concentrate (H‐LFP), the cathode prepared from de‐impurified hematite concentrate (DH‐LFP) exhibits improved phase formation, cleaner surface chemistry, more uniform particle morphology, and a more continuous carbon coating. Benefiting from these structural and interfacial features, DH‐LFP delivers high discharge capacities of 164.7 and 154.7 mAh g −1 at 0.1C and 1.0C, respectively, together with enhanced Li + transport kinetics and cycling stability. This work provides a feasible route for converting impurity‐bearing mineral Fe resources into high‐performance LFP cathodes through source‐level metallurgical regulation.

Читать у издателя →

Похожие статьи