Model experiment under gravitational field on deformation behavior of PVC pipe subjected to vertical and horizontal loading locally from inner surface
Аннотация
The internal loading method (ILM) has been proposed as a non-destructive and trenchless technique for evaluating the cross-sectional stiffness of buried pipes. In this study, the ILM was applied to polyvinyl chloride (PVC) pipes in the model ground under gravitational field considering the current design standard. The objective is to verify the relative consistency between the deformation behavior observed in laboratory-scale experiments and that reported in previous field-scale studies, thereby enabling future applications of this model to investigate the effects of pipe deterioration and variations in soil density for developing evaluation criteria. The response of buried PVC pipes under localized internal loading in both vertical and horizontal directions was investigated. The load-deformation curves obtained under vertical loading exhibited nonlinear characteristics similar to those observed in field experiments. Comparable trends were also observed under horizontal loading. The oblique compressive strain in the circumferential direction on the outside of the buried PVC pipe exhibited a similar increasing trend from the second loading onward. However, the level of oblique compressive strain was minimal, and it was suggested that the oblique deformation was also negligible. These results confirm that the deformation modes of buried pipes under ILM loading, as observed in both model and field experiments, are relatively consistent.