Поверхности, покрытия и плёнки
5701 статей · 6 журналов
Журналы подкатегории (6)
- Surfaces and Interfaces · Elsevier (5664)
- Journal of Applied Polymer Science · Wiley (15)
- Vacuum · Elsevier (15)
- Progress in Surface Science · Elsevier (7)
- Journal of Coatings Technology and Research · Springer Nature (0)
- Tribology Letters · Springer Nature (0)
- Refractive index-matched multilayer composites for ultra-transparent and durable self-cleaning solar surfaces: From optical mechanism to field validation
- Rapid microwave-assisted phytosynthesis of biomass-coated Ag/AgCl-Nd-containing phase nanocomposite: A dual-functional material for antioxidant and sunlight-driven photocatalytic applications
- Interfacial polyaniline engineering enables bifunctional electrocatalysis for uric acid oxidation and selective H2O2 generation toward antibacterial applications
- A Green, DES-mediated one-pot synthesis of a direct Z-scheme CQDs/CoFe2O4 heterojunction with enhanced photo-Fenton activity
- Optimizing controlled-release performance of castor oil-based polyurethane coating through eco-friendly manganese chelates
- Enhanced deep mineralization of isopropanol in a micro-fluidized bed system over homogeneous chitosan-TiO2 spheres
- Femtosecond laser-fabricated 4H-SiC with superhydrophobic surfaces and subsurface absorption layers for anti-icing and photo-electrothermal de-icing
- Orthogonal strain and interlayer-coupling control of spin-polarized states in MoSi2N4-type bilayer MnAl2S4
- Adsorptive removal of cationic crystal violet and anionic reactive orange dyes by activated carbon from Acacia auriculiformis pods
- Sandwich-structured multifunctional composite coating for visible–infrared signature suppression and X-band electromagnetic shielding on textiles
- Atomistic simulation-guided design of a high-efficiency Cu₀.₅Zn₀.₅O/Si photocatalyst for enhanced environmental remediation
- Surface terminations and functional groups orientation govern interfacial bonding in Ti₃C₂ MXene/graphene heterostructures: A first-principles study
- Oxygen-controlled NiO/Ag multilayer heterostructures for surface-enhanced Raman scattering
- Evaluation of silicon oxynitride thin films as a passivation layer for surface acoustic wave filter in relation to nitrogen concentration
- Bottom-up growth of inorganic 1D nanomaterials with atomic precision
- Editorial Board
- Plasma assisted surface engineering biomaterials for orthopedic applications: comprehensive review
- Interface bonding and thermal conductivity of synthetic diamond: A review
- Comprehensive review of hydrogenated amorphous carbon coatings with SiOx and their multifunctional properties
- Editorial Board, Aims & Scope, Table of Contents
-
Segregated Actuator Based on Micro‐Foamed Films Featuring Beneficial Load‐Bearing Capacity and Electromagnetic Interference Shielding Performance
ABSTRACT Soft actuators serve as essential functional units for intelligent flexible equipment and extreme‐environment actuating devices. Traditional dense‐film actuators suffer from heavy weight and poor radiation stability, which...
-
Room‐Temperature Cure Acceleration of Commercial Bio‐Based Epoxy Resins Using a Zinc Chloride–Ethanol Accelerator: Epoxide Conversion and Mechanical Performance
ABSTRACT Bio‐based epoxy resins face limited industrial adoption due to prolonged room‐temperature curing times. To overcome this, a zinc chloride–ethanol accelerator solution (ZnET; ≈0.43 wt% ZnCl 2 and ≈0.57 wt% ethanol) was added at...
-
Small Molecule and Oligomeric Phenylated Polyphenylene With Ethynyl, Phenylethynyl, and Perfluorophenylethynyl End‐Cap Resins: Synthesis and Characterization of Thermal Properties
ABSTRACT This work introduces a novel class of melt‐processable polyarylene resins, including the first demonstration of perfluorophenylethynyl end‐capping, which successfully decouples low‐temperature melting from high‐temperature...
-
Cardanol‐Based Non‐Isocyanate Polyurethane Coatings: Synthesis and Characterization
ABSTRACT This study focuses on developing non‐isocyanate polyurethane (NIPU) coatings to mitigate the environmental issues associated with conventional isocyanate‐based coatings. Utilizing the nucleophilic addition reaction between...
-
Glycidyl Methacrylate‐Mediated Network Formation in Bio‐Based Styrene–Acrylate/Epoxidized Soybean Oil Latex for Balanced Coating Performance
ABSTRACT A bio‐based waterborne styrene–acrylate/epoxidized soybean oil (SA/ESO) latex was developed by directly incorporating unmodified ESO into a glycidyl methacrylate (GMA)‐functionalized acrylic matrix and curing with isophorone...
-
Investigation of the Mechanical, Thermal, and Morphological Properties of Polypropylene Composites Reinforced With Carbon Fiber Powder and Rare Earth Oxide Additives
ABSTRACT In this study, composite materials obtained by blending low‐density polyethylene (LDPE)‐based filler materials containing carbon fiber powder (CFP) and rare earth oxides (REO) with polypropylene (PP) in various ratios were...
-
Cavitation and Abrasion Resistance by Tuning the Strength and Toughness of Polyurethane
ABSTRACT Polyurethane elastomers (PUEs) with systematically varied hard‐segment content and cross‐linking density were developed to investigate the relationship between mechanical balance and damage mechanisms under harsh service...
-
Development, Characterization, and pH ‐Responsive Properties of Starch‐Pectin Biodegradable Films Incorporated With Annatto and Beetroot Extracts
ABSTRACT In this study, biodegradable starch–pectin films were developed using the casting technique and characterized to investigate the effects of incorporating natural annatto and beetroot extracts on their physicochemical,...
-
Salt‐Induced Micellization and Disulfide‐Mediated Modulation of Elastin‐Like Polypeptide Block Copolymers
ABSTRACT Understanding the self‐assembly and environmental responsiveness of block copolymers in aqueous environments is essential for designing smart macromolecular materials. Biologically synthesized polymers have attracted increasing...
-
Study on the Multi‐Environment Anti‐Aging Performance of Nano‐Textured PTFE – Al 2 O 3 Hybrid FKM Composites
ABSTRACT Fluoroelastomer (FKM) is widely used in aerospace sealing but suffers from synergistic degradation caused by thermal oxidative aging, low temperature embrittlement, salt spray corrosion, and oil swelling. In this study,...