In this study, dense Cr–Nb and Cr–V binary composite carbide layers were successfully fabricated on GCr15 steel via the powder pack cementation technique, and the microstructure, mechanical properties, and dry sliding wear behaviors of the composite carbide layers were investigated. The results show that the as‐prepared composite carbide layers are mainly composed of (Cr, Fe) 7 C 3 . All the composite carbide layers have a thickness of more than 16 μm and a microhardness higher than 1500 HV 0. 3 . The Cr–Nb composite carbide layer exhibits excellent toughness, with the optimal bonding strength grade reaching HF1; the Cr–V composite carbide layer exhibits higher bonding strength, with its critical failure load LC 2 exceeding 40 N. As the Cr–Fe content decreases and the Nb–Fe/V–Fe content increases, the specific wear rate of the composite carbide layers shows a decreasing trend. Based on the analysis of the worn surface morphology and phase composition, it is found that under the relatively high load of 30 N, corundum‐type composite oxides, spinel‐type composite oxides, and graphite‐like structures are readily formed in situ at the friction interface. These products play a self‐lubricating role during the sliding process, thereby effectively reducing friction and wear.
Shuke He, Jian Shang, Mei ling Liu. Microstructure and Properties of Cr–M(Nb,V) Composite Carbide Layers on GCr15 Steel Prepared by Pack Cementation. // Advanced Engineering Materials. – 2026. – DOI: 10.1002/adem.71431. – URL: https://advanced.onlinelibrary.wiley.com/doi/10.1002/adem.71431?af=R
Shuke He, Jian Shang, & Mei ling Liu (2026). Microstructure and Properties of Cr–M(Nb,V) Composite Carbide Layers on GCr15 Steel Prepared by Pack Cementation. Advanced Engineering Materials. https://doi.org/10.1002/adem.71431
Shuke He, et al. “Microstructure and Properties of Cr–M(Nb,V) Composite Carbide Layers on GCr15 Steel Prepared by Pack Cementation.” Advanced Engineering Materials, 2026. doi:10.1002/adem.71431.
@article{He2026,
title = {Microstructure and Properties of Cr–M(Nb,V) Composite Carbide Layers on GCr15 Steel Prepared by Pack Cementation},
author = {He, Shuke and Shang, Jian and Liu, Mei ling},
journal = {Advanced Engineering Materials},
year = {2026},
doi = {10.1002/adem.71431},
url = {https://advanced.onlinelibrary.wiley.com/doi/10.1002/adem.71431?af=R}
}
ABSTRACT Polyurethane hot‐melt adhesives (PU‐HMAs) are widely used, yet face a long‐standing trade‐off between low viscosity required for effective interfacial establishment and high crosslink density necessary for mechanical robustness...
ABSTRACT Environmentally sustainable processing of perovskite solar cells (PSCs) requires green solvent systems that can simultaneously produce high‐quality perovskite thin films with high efficiency and long‐term stability. Here, we...
ABSTRACT Defects at the surfaces and grain boundaries of perovskite films seriously restrict the power conversion efficiency (PCE) and stability of perovskite solar cells (PSCs). While post‐treatment with organic cations is widely...
ABSTRACT A fundamental challenge in bioelectronics is to create an electrical bioadhesive interface that forms spontaneously, adheres robustly, and integrates seamlessly with dynamic tissues. While in‐situ hydrogels offer a potential...